跳转到主内容

配件

没有特定配件。

  1. Place The Claw in upright position with controls facing you.
    • Place The Claw in upright position with controls facing you.

  2. Gently flip The Claw machine upside down with the controls facing you.
    • Gently flip The Claw machine upside down with the controls facing you.

  3. Remove all ten screws from the bottom cover using a Phillips #1 screwdriver.
    • Remove all ten screws from the bottom cover using a Phillips #1 screwdriver.

    • You will need a screwdriver with a long thin neck to fit in the screw holes.

  4. Slide the bottom cover off to the side. Do not completely remove bottom cover as it is still connected  to wires.
    • Slide the bottom cover off to the side.

    • Do not completely remove bottom cover as it is still connected to wires.

  5. Complete removal of the bottom cover is not necessary, however if you feel you need to take the cover completely off the machine to complete your task it can be done by the following process.
    • Complete removal of the bottom cover is not necessary, however if you feel you need to take the cover completely off the machine to complete your task it can be done by the following process.

    • You will need to cut the two green wires attached to the music player.

    • Then you will need to cut the white wire that leads to the battery compartment.

    • Finally you will need to cut the black wire leading to the battery compartment as well.

    • The complete removal of the bottom cover requires the cutting and soldering of wires. For help with soldering reference: 如何焊接和拆焊.

结论

To reassemble your device, follow these instructions in reverse order.

Alain Pierre

于2016年03月22日注册

1,149 信誉积分

创作了9篇指南

团队

UMass Dartmouth, Team 4-8, Catania Spring 2016 UMass Dartmouth, Team 4-8, Catania Spring 2016 的会员

UMASSD-CATANIA-S16S4G8

3 名成员

创作了9篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 49