修复你的物品 社区 商店

Teenage Engineering OP-Z Back Cover Replacement

简介

Use this guide to open the OP-Z and replace the back cover.

  1. Teenage Engineering OP-Z Back Cover Replacement, Back Cover: 步骤 1 中的图像 1，3 Teenage Engineering OP-Z Back Cover Replacement, Back Cover: 步骤 1 中的图像 2，3 Teenage Engineering OP-Z Back Cover Replacement, Back Cover: 步骤 1 中的图像 3，3

    • Unlock the four rubber feet by turning them 90° counterclockwise using your thumb or finger tip.

    • There is a tiny mark on every foot facing the bottom edge of the OP-Z. After turning them they should face towards the short edge where the on/off switch is.

    编辑

  3. Teenage Engineering OP-Z Back Cover Replacement: 步骤 2 中的图像 1，2 Teenage Engineering OP-Z Back Cover Replacement: 步骤 2 中的图像 2，2

    • When turning the OP-Z over again the bottom plate should come off by itself (thanks gravity).

    • If the bottom plate won’t come off you might want to make sure every foot is rotated correctly and gently tug on one of them.

    编辑

  4. Teenage Engineering OP-Z Back Cover Replacement: 步骤 3 中的图像 1，1

    • Remove the bottom plate including the rubber feet.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与1其他贡献者

Tobias Isakeit

于03/31/14注册

119,540 声望

创作了189篇指南

徽章: 46

+ 43更多徽章

团队

Tobias Isakeit - Repairability Engineer Tobias Isakeit - Repairability Engineer 的会员

Business

1 名成员

创作了1,093篇指南

一条评论

and uhm where to order the backplate? :/

boombipbass - 回复

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 3

过去 30 天： 18

总计 1,576