修复你的物品 社区 商店

本指南有更多最近的更新。切换到最新的未经核实的版本。

Super Nintendo Power Switch Replacement

撰写者： Cameron Deines (和另外11个贡献者)
  • 评论： 5
  • 收藏 19
  • 完成 16

难度

中等

步骤

4

所需时间

15分钟

节

2

标志

0

简介

This guide will show you how to remove the power switch connected to the motherboard. Steps can be followed in reverse to install a new power switch.

  1. Remove the six screws located on the underside of the system using the Gamebit 4.5mm screwdriver.

    • Remove the six screws located on the underside of the system using the Gamebit 4.5mm screwdriver.

    翻译

  2. Carefully flip the unit back over. Locate the seam. Lift and separate the upper half of the case from the lower half of the case. Locate the seam. Lift and separate the upper half of the case from the lower half of the case.

    • Carefully flip the unit back over.

    • Locate the seam. Lift and separate the upper half of the case from the lower half of the case.

    翻译

  4. Remove the two 11.7 mm Phillips #2 screws connecting the power switch to the motherboard.

    • Remove the two 11.7 mm Phillips #2 screws connecting the power switch to the motherboard.

    翻译

  5. The power switch is connected to the motherboard near the top left of the console. Carefully pull the connector from its socket on the motherboard. You may need to wiggle it out as you pull.

    • The power switch is connected to the motherboard near the top left of the console.

    • Carefully pull the connector from its socket on the motherboard. You may need to wiggle it out as you pull.

    • Do not detach the connector by pulling on the wires. This could damage the wires or the socket.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

16等其他人完成本指南。

作者

与11其他贡献者

Cameron Deines

于2010年10月05日注册

694 信誉积分

创作了2篇指南

徽章: 13

+ 10更多徽章

团队

Cal Poly, Team 4-47, Amido Fall 2010 Cal Poly, Team 4-47, Amido Fall 2010 的会员

CPSU-AMIDO-F10S4G47

4 名成员

创作了20篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时： 6

过去的7天： 21

过去的30天： 96

总计 20,783