Sony H.ear On 2 Motherboard Replacement

简介

Learn how to replace the motherboard on your Sony H.ear On 2 headphones!

This guide focuses on replacing the motherboard component located in the left ear cup. This guide will require soldering and desoldering. Please see 如何焊接和拆焊 before you attempt to desolder and resolder necessary on the components. Although optional, it is recommended you remove the battery before operating on the device for safety reasons.

你所需要的

步骤 1 Motherboard

Sony H.ear On 2 Motherboard Replacement, Motherboard: 步骤 1 中的图像 1，2

Sony H.ear On 2 Motherboard Replacement, Motherboard: 步骤 1 中的图像 2，2

Start on the left side by using the plastic opening tool in the crease between the ear cup and plastic. Gently apply pressure until it separates.
Do not force any parts off as the plastic holders may snap off if too much pressure is applied.

翻译

步骤 2

Use the JIS #00 Screwdriver to remove the 2 6.4mm screws holding in the motherboard.

翻译

步骤 3

Sony H.ear On 2 Motherboard Replacement: 步骤 3 中的图像 3，3

De-solder all 18 wire-connections on the motherboard.
Record wire positions on board for proper connections when re-soldering the replacement board.
Do not overheat joints while de-soldering to prevent board damage.
Please see 如何焊接和拆焊 for help on soldering and desoldering connections.