当前版本的文档还未经巡查,您可以查看最新的已查核版本。
你所需要的
-
-
这个步骤还没有翻译 帮忙翻译一下
-
Using a spudger, wedge the flat tipped end between the black bar and the circuit board.
-
Carefully lift the black bar into the vertical position.
-
Repeat first two bullet points for the circuit board port directly to the left of the one shown in this picture.
-
Use tweezers to carefully pull the electrical ribbons from the circuit board ports.
-
即将完成!
终点
2等其他人完成本指南。