跳转到主内容
英语
中文

正翻译步骤 3

步骤 3
Using a spudger, wedge the flat tipped end between the black bar and the circuit board.
  • Using a spudger, wedge the flat tipped end between the black bar and the circuit board.

  • Carefully lift the black bar into the vertical position.

  • Repeat first two bullet points for the circuit board port directly to the left of the one shown in this picture.

  • Use tweezers to carefully pull the electrical ribbons from the circuit board ports.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可