修复你的物品 社区 商店

Sony BDP-BX510 Port Board Replacement

简介

In the situation that your Sony BDP-BX510 port board is not working despite trying the solutions on the troubleshooting page, you may need to replace it. This guide will provide you with the steps required to safely remove your port board for replacement.

你所需要的

  1. Sony BDP-BX510 Port Board Replacement, Outer Cover: 步骤 1 中的图像 1，1

    • Plug in the device to turn it on, then press the eject ( ⏏ ) button to open the tray.

    翻译

  2. Sony BDP-BX510 Port Board Replacement: 步骤 2 中的图像 1，2 Sony BDP-BX510 Port Board Replacement: 步骤 2 中的图像 2，2

    • To remove the tray cover, hold both sides of the tray cover and gently apply a downward pressure.

    • Apply slightly more pressure to the left side until it unhooks then unhook the right side.

    • Close the disk tray by pressing the eject button again, then power off the device and unplug it.

    • Do not use too much force to remove the tray cover as you may break it.

    翻译

  3. Sony BDP-BX510 Port Board Replacement: 步骤 3 中的图像 1，2 Sony BDP-BX510 Port Board Replacement: 步骤 3 中的图像 2，2

    • Turn to the back of the device.

    • Remove the two 7mm Phillips #2 screws.

    • Slide the two plastic covers on both sides of the device towards the back of the device to remove them.

    翻译

  5. Sony BDP-BX510 Port Board Replacement: 步骤 4 中的图像 1，3 Sony BDP-BX510 Port Board Replacement: 步骤 4 中的图像 2，3 Sony BDP-BX510 Port Board Replacement: 步骤 4 中的图像 3，3

    • Turn the device so you can see the bottom.

    • Unclip the three black plastic clips on the bottom of the device.

    • Unclip one clip on each side of the device.

    翻译

  6. Sony BDP-BX510 Port Board Replacement: 步骤 5 中的图像 1，1

    • Slide the cover forward to remove.

    翻译

  7. Sony BDP-BX510 Port Board Replacement, Port Board: 步骤 6 中的图像 1，1

    • Find the large ribbon cable that connects the port board to the motherboard.

    • Carefully pull directly upwards to disconnect the cable.

    翻译

  8. Sony BDP-BX510 Port Board Replacement: 步骤 7 中的图像 1，1

    • Using the Phillips #1 screwdriver, remove the 5mm screwdriver attached to the port board.

    翻译

  9. Sony BDP-BX510 Port Board Replacement: 步骤 8 中的图像 1，1

    • Unclip the metal piece on the lower right corner by gently lifting it up.

    翻译

  10. Sony BDP-BX510 Port Board Replacement: 步骤 9 中的图像 1，1

    • Remove the port board by simply pulling it away from the device.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

作者

与1其他贡献者

Niki Ngosi

于01/19/20注册

375 声望

创作了3篇指南

徽章: 7

+ 4更多徽章

团队

York University, Team S1-G10, Woodhouse Winter 2020 York University, Team S1-G10, Woodhouse Winter 2020 的会员

YORK-WOODHOUSE-W20S1G10

2 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 4

过去 30 天： 5

总计 129