修复你的物品 社区 商店

Shark NV352 Roller Brush Motor Replacement

简介

If your roller brush is clear of debris, but still won't rotate, the roller brush motor may need to be replaced. Follow these steps to remove the roller brush motor for replacement.

你所需要的

  1. Shark NV352 Roller Brush Motor Replacement, Roller Brush: 步骤 1 中的图像 1，2 Shark NV352 Roller Brush Motor Replacement, Roller Brush: 步骤 1 中的图像 2，2

    • Lift the latches on both sides of the vacuum to release the dust canister.

    • Remove the dust canister from the vacuum by lifting it up.

    编辑

  2. Shark NV352 Roller Brush Motor Replacement: 步骤 2 中的图像 1，1

    • Lay down the vacuum to access the bottom panel of the roller brush compartment.

    编辑

  3. Shark NV352 Roller Brush Motor Replacement: 步骤 3 中的图像 1，2 Shark NV352 Roller Brush Motor Replacement: 步骤 3 中的图像 2，2

    • Using the metal spudger, pry the two small wheels located at the two bottom corners of the vacuum to remove them.

    编辑

  4. Shark NV352 Roller Brush Motor Replacement: 步骤 4 中的图像 1，2 Shark NV352 Roller Brush Motor Replacement: 步骤 4 中的图像 2，2

    • Remove the eight 19mm Phillips #2 screws from the plastic cover.

    • Remove the two 14 mm Phillips #2 screws from the upper section of the plastic cover.

    编辑

  6. Shark NV352 Roller Brush Motor Replacement: 步骤 5 中的图像 1，2 Shark NV352 Roller Brush Motor Replacement: 步骤 5 中的图像 2，2

    • You will need to apply a strong force while pulling the wheels off because they are attached very tightly.

    • Remove the wheels by pulling them out of their axles, away from the vacuum.

    编辑

  7. Shark NV352 Roller Brush Motor Replacement: 步骤 6 中的图像 1，2 Shark NV352 Roller Brush Motor Replacement: 步骤 6 中的图像 2，2

    • Perform the next step slowly and carefully so the wiring connecting the motherboard to the rest of the vacuum is not broken.

    • Gently pull the grey lower part of the roller brush compartment away from the purple upper part of the compartment.

    编辑

  8. Shark NV352 Roller Brush Motor Replacement: 步骤 7 中的图像 1，1

    • Lift up and then pull the roller belt off of the roller brush and the motor to remove it.

    编辑

  9. Shark NV352 Roller Brush Motor Replacement: 步骤 8 中的图像 1，1

    • Take out the roller brush by lifting it out of its tray.

    编辑

  10. Shark NV352 Roller Brush Motor Replacement, Roller Brush Motor: 步骤 9 中的图像 1，1

    • The wires are attached to the motor, so take out the motor slowly to ensure that they do not break.

    • Remove the roller brush motor by carefully lifting it out of the vacuum.

    编辑

  11. Shark NV352 Roller Brush Motor Replacement: 步骤 10 中的图像 1，1

    • Desolder the wires running to the motor from the motherboard. For details on how to desolder, visit this soldering guide.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

作者

与3其他贡献者

Wesley T Benica

于09/22/17注册

378 声望

创作了2篇指南

徽章: 12

+ 9更多徽章

团队

Cal Poly, Team S18-G5, Forte Fall 2017 Cal Poly, Team S18-G5, Forte Fall 2017 的会员

CPSU-FORTE-F17S18G5

4 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 3

过去 7 天： 8

过去 30 天： 38

总计 3,042