修复你的物品 社区 商店

Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement

简介

A broken SIM card holder or memory card holder prevents your tablet from connecting to your network or storing memory, respectively. Before starting, eject the SIM card and memory card trays.

你所需要的

  1. Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement, Screen: 步骤 1 中的图像 1，2 Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement, Screen: 步骤 1 中的图像 2，2

    • Apply the heat gun around the edges of the tablet to melt the adhesive glue.

    • Do not allow the gun to remain still for more than two seconds, so that you do not melt the plastic around the screen.

    • If you do not have access to a heat gun, you may also use an iOpener or a hair dryer. Refer to the iOpener guide for extra help.

    翻译

  2. Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement: 步骤 2 中的图像 1，2 Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement: 步骤 2 中的图像 2，2

    • Apply the suction to the bottom or top right corner.

    • Use the plastic opening tool at several points around the screen while the suction is being applied to pop the screen out.

    翻译

  3. Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement: 步骤 3 中的图像 1，1

    • Once the screen is detached, open the tablet like a book.

    • Gently open the tablet, and do not pull the pieces apart since you can risk damaging the orange ribbon cable.

    翻译

  5. Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement: 步骤 4 中的图像 1，1

    • Using the precision tweezers, remove the silver tape that is holding the orange ribbon cable connecting the two pieces.

    翻译

  6. Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement: 步骤 5 中的图像 1，1

    • Using the precision tweezers, remove the small press-fit connector from the body of the tablet.

    翻译

  7. Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement, Screws: 步骤 6 中的图像 1，2 Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement, Screws: 步骤 6 中的图像 2，2

    • Using the Philips #000 screwdriver, remove the seventeen 2.74 mm screws around the edges.

    • Remove the two 2.74 mm black screws in the middle of the tablet with the Philips #000 screwdriver.

    • Put the screws on a magnetic project mat or in a container so that you do not lose them.

    翻译

  8. Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement: 步骤 7 中的图像 1，3 Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement: 步骤 7 中的图像 2，3 Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement: 步骤 7 中的图像 3，3

    • Take the plastic opening tool around the tablet to remove the motherboard from the device.

    翻译

  9. Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement, SIM Card Holder: 步骤 8 中的图像 1，2 Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement, SIM Card Holder: 步骤 8 中的图像 2，2

    • Locate the SIM card and the memory card holders along the right side of the tablet.

    • Using the precision tweezers, remove the SIM card and memory card holders.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与4其他贡献者

Joy Harris

于02/15/17注册

814 声望

创作了7篇指南

徽章: 15

+ 12更多徽章

团队

USF Tampa, Team S3-G4, Sullivan Spring 2017 USF Tampa, Team S3-G4, Sullivan Spring 2017 的会员

USFT-SULLIVAN-S17S3G4

3 名成员

创作了14篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 2

过去 30 天： 6

总计 690