Samsung Galaxy S6 Motherboard Assembly Replacement

简介

Prereq to remove the motherboard.

This guide involves removing the rear glass. Removing the rear glass destroys the adhesive holding it in place. Follow this guide to reinstall the rear glass.

你所需要的

步骤 1 Motherboard Assembly

Samsung Galaxy S6 Motherboard Assembly Replacement, Motherboard Assembly: 步骤 1 中的图像 1，3

Samsung Galaxy S6 Motherboard Assembly Replacement, Motherboard Assembly: 步骤 1 中的图像 2，3

Samsung Galaxy S6 Motherboard Assembly Replacement, Motherboard Assembly: 步骤 1 中的图像 3，3

Use the pointed edge of a spudger to disconnect the Bluetooth and Wi-Fi antenna cable connectors from their sockets on the motherboard.

翻译

步骤 2

Use the flat end of the spudger to disconnect the home button connector.

翻译

步骤 3

Use the flat end of a spudger to disconnect the display assembly cable from the motherboard.

翻译

步骤 4

Disconnect the earpiece speaker assembly cable connector from the motherboard.

翻译

步骤 5

Lift the camera-side end of the motherboard to separate it from the display frame.
You may need to move some of the ribbon cables out of the way while you lift the motherboard. If the board is hard to lift, check that it is fully disconnected and not caught on any ribbon cables.
Do not fully remove the motherboard yet—it is still attached to the daughterboard via a ribbon cable on the underside of the motherboard.

翻译

步骤 6

Use the flat end of a spudger to disconnect the daughterboard ribbon cable connector from its socket on the underside of the motherboard.

翻译

结论

To reassemble your device, follow these instructions in reverse order. When reinstalling the rear glass, refer to the rear glass adhesive replacement guide.

3等其他人完成本指南。