Ryobi P271 Trigger Replacement

简介

This repair is for if your trigger on your drill stops working or has issues cutting in and out. Soldering is required for this repair and it will fix your drill trigger for future use.

你所需要的

步骤 1 Battery

Ryobi P271 Trigger Replacement, Battery: 步骤 1 中的图像 1，3

Ryobi P271 Trigger Replacement, Battery: 步骤 1 中的图像 2，3

Ryobi P271 Trigger Replacement, Battery: 步骤 1 中的图像 3，3

Detach the battery unit from the drill body by pressing the battery release buttons on both sides of the unit and pulling outwards.

编辑

步骤 2 Trigger

Ryobi P271 Trigger Replacement, Trigger: 步骤 2 中的图像 1，1

Remove the screws from the drill's casing to gain access to the interior.

编辑

步骤 3

Lift and remove the casing off of the drill body.

编辑

步骤 4

Carefully lift and remove the battery clip, trigger, motor, and everything connected to the wires and pull straight out of the drill.

编辑

步骤 5

Separate the wiring from the trigger and the motor using a soldering iron and them replace them with a new trigger and motor by soldering the wires back together.
Follow this guide for soldering tips.