跳转到主内容

简介

Removing the wheels from a car is a very common step when performing repairs. Wheels are removed to access brake, suspension, and steering components. The wheel may also need to be removed in the event of a damaged tire or wheel, or when performing a tire rotation.

The following guide was created with an SES model Focus. Different factory and aftermarket wheels may have additional steps to access the wheel lug nuts, but the steps are essentially the same.

  1. Removing 2005-2007 Ford Focus Front Wheel, Front Wheel: 步骤 1 中的图像 1,1
    • Put the car in park (automatic) or neutral (manual).

    • Apply the parking brake.

    • Place chocks behind the rear wheels.

  2. Removing 2005-2007 Ford Focus Front Wheel: 步骤 2 中的图像 1,1
    • Use a 19 mm lug wrench to loosen each lug nut a half turn.

  3. Removing 2005-2007 Ford Focus Front Wheel: 步骤 3 中的图像 1,2 Removing 2005-2007 Ford Focus Front Wheel: 步骤 3 中的图像 2,2
    • Use a hydraulic jack on the car's frame to jack the car.

    • A small notch shows where to place the jack.

    • It is only necessary to jack the car until the wheel no longer touches the ground.

  4. Removing 2005-2007 Ford Focus Front Wheel: 步骤 4 中的图像 1,1
    • Place a jack stand on the frame and remove the jack.

    • Never work on or underneath a car that is only supported by a jack. The car may fall, causing serious injury, or even death.

  5. Removing 2005-2007 Ford Focus Front Wheel: 步骤 5 中的图像 1,2 Removing 2005-2007 Ford Focus Front Wheel: 步骤 5 中的图像 2,2
    • Use a lug wrench to completely remove the four lug nuts.

    • Remove the wheel.

终点

David Hodson

于2010年04月13日注册

147,360 声望

创作了127篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 21

总计 1,903