Razer Blade Pro 17 2019 Battery Replacement

简介

Over time, laptop batteries degrade and sometimes swell, leading to shorter usage times between charges and safety risks. Fortunately, swapping to a new battery can always fix the issue. You will need a Philips #1 screwdriver, a Torx #5 screwdriver, an opening pick, and one new Razer Blade Pro 17 Battery for model 2019.

After completing this replacement, your laptop will have increased battery life.

你所需要的

步骤 1 Battery

Razer Blade Pro 17 2019 Battery Replacement, Battery: 步骤 1 中的图像 1，2

Razer Blade Pro 17 2019 Battery Replacement, Battery: 步骤 1 中的图像 2，2

Unplug the laptop.
Press and hold the power button to shut down the laptop.

翻译

步骤 2

Razer Blade Pro 17 2019 Battery Replacement: 步骤 2 中的图像 3，3

Remove the 12 screws that secure the lower case with a T5 Torx screwdriver.

翻译

步骤 3

Razer Blade Pro 17 2019 Battery Replacement: 步骤 3 中的图像 3，3

Insert the opening picks into the gap between the back plate and the body of the laptop and pry around the perimeter until the lower case releases.
It is easier to use the gap at the ethernet port.
Lift up and remove the lower case.
Be careful not to place anything on the back to avoid scratching any components.

翻译

步骤 4

Razer Blade Pro 17 2019 Battery Replacement: 步骤 4 中的图像 3，3

Remove the black sticker on the fan assembly.

翻译

步骤 5

Use your fingernails to gently "walk" the battery connector directly out of its port.
Do not pull directly on the wires, as depicted in the photo.

翻译

步骤 6

Use your fingernails or a spudger to gently lever the fan connector directly out of its socket.
Do not pull directly on the wires, as show in the photos.

翻译

步骤 7

Razer Blade Pro 17 2019 Battery Replacement: 步骤 7 中的图像 3，3

Use a Phillips #1 screwdriver to remove the 10 screws that secure the battery and fan assembly.

翻译

步骤 8

Razer Blade Pro 17 2019 Battery Replacement: 步骤 8 中的图像 3，3

Lift the fan assembly and battery out of the chassis.

翻译

结论

For optimal performance, calibrate your newly installed battery after completing this guide.
Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.