Razer BlackShark V2 USB Sound Card USB Cable Replacement

简介

If choppy, interrupted, or no audio is being transferred between your device and your Razer BlackShark V2 headset while the USB sound card is in use and your the sound card does not light up, your sound card’s USB cable is likely damaged (to confirm diagnoses & solutions, see Razer BlackShark V2 Troubleshooting Page, "Audio Cutting Out," “No Audio at All,” "Loose or Cracked Sound Card Jack"). This guide will assist you in the replacement of this component. Be mindful to not adversely snap any plastic components or small wires when applying pressure.

你所需要的

步骤 1 USB Sound Card USB Cable

Razer BlackShark V2 USB Sound Card USB Cable Replacement, USB Sound Card USB Cable: 步骤 1 中的图像 1，1

Microwave the iOpener for 30 seconds
The iOpener can get very hot.
Wrap the iOpener around the sound card along the parting line and hold to help weaken the adhesive joining the halves.

翻译

步骤 2

Separate the two halves of the plastic shell of the sound card along the parting line.
Using a sharp tool to saw away stubborn adhesive may be necessary.
Use standard caution when using sharp tools! Never cut, stab, or wedge towards your body or fingers.