跳转到主内容

Razer BlackShark V2 Ear Cushion Replacement

你所需要的

  1. Razer BlackShark V2 Ear Cushion Replacement, Ear Cushion: 步骤 1 中的图像 1,1
    • Place the headset so that the left side is facing you.

    • The left side of the headset has the cable attachment and the volume control knob.

  2. Razer BlackShark V2 Ear Cushion Replacement: 步骤 2 中的图像 1,1
    • Scoop your middle and ring finger underneath the top or bottom inner portion of the ear cushion.

    • You should feel a hard plastic ridge.

    • Pull from the hard plastic ridge, being sure not to pull from the soft cushion.

    • Slowly apply pressure to prevent damage.

  3. Razer BlackShark V2 Ear Cushion Replacement: 步骤 3 中的图像 1,1
    • Pull from the hard plastic ridge, being sure not to pull from the soft cushion.

    • Slowly apply pressure to prevent damage.

  4. Razer BlackShark V2 Ear Cushion Replacement: 步骤 4 中的图像 1,2 Razer BlackShark V2 Ear Cushion Replacement: 步骤 4 中的图像 2,2
    • Once the cushion is removed, make sure the hard plastic base with the clips is attached to it.

    • If you are replacing both ear cushions, repeat Steps 1-4 for the other side. Then, insert the new ear cushions by lining up the clips in their respective holes and applying even pressure until they audibly click.

终点

另外一个人完成了本指南。

2条评论

Thanks - this was very helpful. It was difficult to remove the retainer clip using my fingers - I found it much easier to use the back of a spoon (with a rounded edge) and getting more leverage that way.

Peter Gu - 回复

can someone pls tell me what's the size or mm of the foam?

Lorraine Corda - 回复

添加评论

浏览统计数据:

过去 24 小时: 6

过去 7 天: 44

过去 30 天: 182

总计 1,759