修复你的物品 社区 商店

Pyle Astro PTBL7C LCD Replacement

简介

The Pyle Astro’s screen is comprised of three layers, the external touch panel, the capacitive touch screen overlay, and the tablet’s LCD. Use this guide to replace your tablet’s LCD.

你所需要的

  1. Pyle Astro PTBL7C LCD Replacement, LCD: 步骤 1 中的图像 1，2 Pyle Astro PTBL7C LCD Replacement, LCD: 步骤 1 中的图像 2，2

    • Using the plastic opening tool, work your way along the edge of the tablet.

    • The display is held in place by plastic tabs which slide into recesses in the rear plastic panel.

    • Once all clips are released, gently open and separate the front display assembly and the rear plastic panel.

    • Place the front display assembly facing front side down to expose the inside.

    翻译

  2. Pyle Astro PTBL7C LCD Replacement: 步骤 2 中的图像 1，2 Pyle Astro PTBL7C LCD Replacement: 步骤 2 中的图像 2，2

    • Remove the three 4 mm JIS #0 screws to release the PCB board.

    翻译

  3. Pyle Astro PTBL7C LCD Replacement: 步骤 3 中的图像 1，1

    • The display is held in place by plastic tabs which slide over the outer edges of the backside of the display.

    • Gently work your way around the display while pulling the plastic tabs back to release the LCD display from the front panel.

    翻译

  5. Pyle Astro PTBL7C LCD Replacement: 步骤 4 中的图像 1，1

    • Once all clips are released gently open and separate the front plastic display from the LCD and place the LCD face down.

    • The front plastic display contains the external touch panel, and the capacitive touch screen overlay.

    翻译

  6. Pyle Astro PTBL7C LCD Replacement: 步骤 5 中的图像 1，1

    • Using both hands, gently release the ribbon cable to the capacitive touch screen overlay from the PCB board by pushing both gray tabs outwards.

    翻译

  7. Pyle Astro PTBL7C LCD Replacement: 步骤 6 中的图像 1，1
    翻译

  8. Pyle Astro PTBL7C LCD Replacement: 步骤 7 中的图像 1，1
    在这个步骤中使用的工具：
    Plastic Cards
    $2.99
    购买

    • Using a plastic card, gently remove the adhesive that holds the battery in place and separate the battery from the LCD panel.

    • Exercise extreme caution and be sure to not rupture the battery casing.

    翻译

  9. Pyle Astro PTBL7C LCD Replacement: 步骤 8 中的图像 1，1
    翻译
结论

To reassemble your device, follow these instructions in reverse order.

作者

与2其他贡献者

Andrew Redifer

于03/27/18注册

265 声望

创作了2篇指南

徽章: 4

+1个徽章

团队

IUPUI, Team S3-G6, Harley Spring 2018 IUPUI, Team S3-G6, Harley Spring 2018 的会员

IUPUI-HARLEY-S18S3G6

3 名成员

创作了4篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 3

总计 278