修复你的物品 社区 商店

Polaroid PMID701i 10 Speaker Replacement

简介

If the speakers fail to properly play sound, consider using this guide to replace them.

你所需要的

  1. Polaroid PMID701i 10 Speaker Replacement, Panel: 步骤 1 中的图像 1，2 Polaroid PMID701i 10 Speaker Replacement, Panel: 步骤 1 中的图像 2，2

    • Turn off and unplug the device before starting replacement.

    • Flip the device so that the screen faces down, with the back facing up.

    • The back panel attaches to the device with four 4.0mm long screws, one at each corner, indicated by the red circles in the picture.

    • Unscrew the four screws with a PH000 screwdriver.

    编辑

  2. Polaroid PMID701i 10 Speaker Replacement: 步骤 2 中的图像 1，2 Polaroid PMID701i 10 Speaker Replacement: 步骤 2 中的图像 2，2

    • Flip the device over so that the screen faces up, and the back faces down.

    • Separate the front panel using the Opening Tool on a corner to create an opening.

    • Removing the frame for the first time may take a significant amount of force.

    • Run the tool along the seams of the device to open up all the sides.

    编辑

  3. Polaroid PMID701i 10 Speaker Replacement: 步骤 3 中的图像 1，1

    • Removing the panel too quickly may damage the cable that attaches parts between the two panels.

    • Gently lift the top panel from the bottom panel.

    编辑

  5. Polaroid PMID701i 10 Speaker Replacement: 步骤 4 中的图像 1，2 Polaroid PMID701i 10 Speaker Replacement: 步骤 4 中的图像 2，2

    • The flexible flat cables (FFC) attach to parts in the bottom panel with zero insertion force (ZIF) connectors.

    • Use the Opening tool to flip up the black retaining flap on the smaller connector.

    • Gently lift the cable, parallel to the panel, to detach it.

    编辑

  6. Polaroid PMID701i 10 Speaker Replacement: 步骤 5 中的图像 1，2 Polaroid PMID701i 10 Speaker Replacement: 步骤 5 中的图像 2，2

    • Use the Opening tool to flip up the black retaining flap on the larger connector.

    • Gently lift the cable, parallel to the panel, to detach it.

    编辑

  7. Polaroid PMID701i 10 Speaker Replacement, Speaker: 步骤 6 中的图像 1，1

    • The speaker is glued to a plastic compartment along the sides, with the least amount of glue on the side near the wires.

    • Use the tweezers to wedge the speaker out of its compartment, starting from the area near the wires.

    编辑

  8. Polaroid PMID701i 10 Speaker Replacement: 步骤 7 中的图像 1，1

    • Use the tweezers to lift the speakers out of its compartment, including the felt cover attached to the plastic.

    编辑

  9. Polaroid PMID701i 10 Speaker Replacement: 步骤 8 中的图像 1，1

    • The speaker attaches to the motherboard with two wires, one red and one black, above the wires for the battery.

    • Desolder the wires from the motherboard. For detailed information, refer to the Solder and Desolder guide.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与2其他贡献者

Amy Li

于01/31/17注册

627 声望

创作了5篇指南

徽章: 8

+ 5更多徽章

团队

Baylor, Team 3-4, Whitney Spring 2017 Baylor, Team 3-4, Whitney Spring 2017 的会员

BU-WHITNEY-S17S3G4

3 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 1

总计 72