PlayStation Start and Select Buttons Replacement

简介

If your Playstation DualShock 3 controller's Start, Select, or PlayStation rubber buttons are damaged, cracked, or ripped, use this guide to replace the rubber and restore the button's function. When this rubber piece is damaged, the controller might not be able to read the button's input.

Before using this guide, test the buttons by pressing down on them from different angles. Typically, there will be no input received if the button is pressed too lightly, or from the sides.

In Step 3, the #2 trigger buttons might pop off while removing the rear cover. If that happens, refer to this guide.

你所需要的

步骤 1 Start and Select Buttons

PlayStation Start and Select Buttons Replacement, Start and Select Buttons: 步骤 1 中的图像 1，1

Before you begin, unplug your controller and console to avoid accidentally turning it on during disassembly.

编辑

步骤 2

PlayStation Start and Select Buttons Replacement: 步骤 2 中的图像 3，3

Use a Phillips #1 screwdriver to remove the five 7.2 mm screws securing the rear cover.

编辑

步骤 3

PlayStation Start and Select Buttons Replacement: 步骤 3 中的图像 3，3

Gently push the rear cover towards the front of the #2 trigger buttons.
Lift the rear cover.
The #2 trigger buttons may come off when removing the cover.

编辑

步骤 4

Lift the battery and set it beside the controller, with care not to strain the wires.
Use a Phillips #1 screwdriver to remove the single 7.2 mm screw securing the motherboard.

编辑