跳转到主内容

Philips Norelco MultiGroom 3100 Motor Replacement

你所需要的

  1. Philips Norelco MultiGroom 3100 Motor Replacement, Power Button: 步骤 1 中的图像 1,1
    • Remove the comb from the top of the trimmer.

  2. Philips Norelco MultiGroom 3100 Motor Replacement: 步骤 2 中的图像 1,2 Philips Norelco MultiGroom 3100 Motor Replacement: 步骤 2 中的图像 2,2
    • Grip the attachment and twist it counterclockwise until you hear a click.

    • Pull the attachment up to remove it from the trimmer.

  3. Philips Norelco MultiGroom 3100 Motor Replacement: 步骤 3 中的图像 1,2 Philips Norelco MultiGroom 3100 Motor Replacement: 步骤 3 中的图像 2,2
    • Hold the trimmer upright so it is facing you.

    • Insert the plastic opening tool in the gap at the top of the power button.

  4. Philips Norelco MultiGroom 3100 Motor Replacement: 步骤 4 中的图像 1,1
    • Apply pressure to pry off the power button.

  5. Philips Norelco MultiGroom 3100 Motor Replacement, Casing: 步骤 5 中的图像 1,2 Philips Norelco MultiGroom 3100 Motor Replacement, Casing: 步骤 5 中的图像 2,2
    • Insert the spudger into the bottom of the gray bezel and begin to gently pry it off.

    • Separate the bezel one clip at a time so that the clips do not break.

  6. Philips Norelco MultiGroom 3100 Motor Replacement: 步骤 6 中的图像 1,2 Philips Norelco MultiGroom 3100 Motor Replacement: 步骤 6 中的图像 2,2
    • Insert the spudger in the indicated hole and apply a tilting force to loosen the outer casing.

    • Pull upward on the top of the inner housing to remove it from the outer casing.

  7. Philips Norelco MultiGroom 3100 Motor Replacement, Motor: 步骤 7 中的图像 1,2 Philips Norelco MultiGroom 3100 Motor Replacement, Motor: 步骤 7 中的图像 2,2
    • Use the tweezers to pull out the inner power button.

  8. Philips Norelco MultiGroom 3100 Motor Replacement: 步骤 8 中的图像 1,1
    • Use the plastic opening tool to separate the clip on the right side of the inner housing.

  9. Philips Norelco MultiGroom 3100 Motor Replacement: 步骤 9 中的图像 1,2 Philips Norelco MultiGroom 3100 Motor Replacement: 步骤 9 中的图像 2,2
    • Push the inner housing up and to the right to separate the left clip from the battery casing.

    • Push the inner housing upwards to separate it from the battery casing.

  10. Philips Norelco MultiGroom 3100 Motor Replacement: 步骤 10 中的图像 1,2 Philips Norelco MultiGroom 3100 Motor Replacement: 步骤 10 中的图像 2,2
    • Use the tweezers to hold the wire steady as you unsolder the blue wire from the power switch.

    • Use the tweezers to remove the power switch.

    • For help with soldering check out the iFixit Soldering Technique Guide.

  11. Philips Norelco MultiGroom 3100 Motor Replacement: 步骤 11 中的图像 1,3 Philips Norelco MultiGroom 3100 Motor Replacement: 步骤 11 中的图像 2,3 Philips Norelco MultiGroom 3100 Motor Replacement: 步骤 11 中的图像 3,3
    • Pull up on the motor to remove it from the battery casing.

    • Use the tweezers to hold the black wire steady while unsoldering it from the base of the battery.

    • Using the tweezers, pull on the black wire to remove it from the base of the battery.

结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

团队

USF Tampa, Team 1-1, Leahy Fall 2015 USF Tampa, Team 1-1, Leahy Fall 2015 的会员

USFT-LEAHY-F15S1G1

2 名成员

创作了3篇指南

4条评论

¿Me puedes ayudar con algo?

Johan Avendaño - 回复

Can you help me with something?

Johan Avendaño - 回复

this guide was created also by nina lovekrist in 2015

Nina Lovekrist - 回复

Where can I get the motor with copper shaft?

amal.hardik - 回复

添加评论

浏览统计数据:

过去 24 小时: 3

过去 7 天: 5

过去 30 天: 18

总计 4,636