修复你的物品 社区 商店

Philips Norelco 5801XL Battery Replacement

简介

Use this guide to replace the rechargeable battery in the Philips Norelco 5801XL. The steps should be followed exactly as listed in the guide. Some soldering skills are required. Be sure to handle with care. For help with soldering: click here.

你所需要的

  1. Philips Norelco 5801XL Battery Replacement, Battery: 步骤 1 中的图像 1，2 Philips Norelco 5801XL Battery Replacement, Battery: 步骤 1 中的图像 2，2

    • Using a T8 torx screwdriver, remove both 2mm T8 screws.

    翻译

  2. Philips Norelco 5801XL Battery Replacement: 步骤 2 中的图像 1，2 Philips Norelco 5801XL Battery Replacement: 步骤 2 中的图像 2，2

    • Using a plastic opening tool, separate the front housing from the back housing.

    • Carefully pull the housing apart.

    翻译

  3. Philips Norelco 5801XL Battery Replacement: 步骤 3 中的图像 1，3 Philips Norelco 5801XL Battery Replacement: 步骤 3 中的图像 2，3 Philips Norelco 5801XL Battery Replacement: 步骤 3 中的图像 3，3

    • Remove the plastic bracket using a plastic opening tool.

    • Pry from the inside of the bracket towards the outside of the housing to remove it.

    翻译

  5. Philips Norelco 5801XL Battery Replacement: 步骤 4 中的图像 1，1

    • Remove the two T8 2mm Philips screws holding onto the bracket over the charge port.

    • Remove the bracket. It will pull straight out.

    翻译

  6. Philips Norelco 5801XL Battery Replacement: 步骤 5 中的图像 1，1

    • Push in the charge port using the plastic opening tool.

    翻译

  7. Philips Norelco 5801XL Battery Replacement: 步骤 6 中的图像 1，1

    • Lift the circuit board upwards and fold it towards the head of the razor.

    • Do not break the contacts connecting the board to the motor.

    翻译

  8. Philips Norelco 5801XL Battery Replacement: 步骤 7 中的图像 1，3 Philips Norelco 5801XL Battery Replacement: 步骤 7 中的图像 2，3 Philips Norelco 5801XL Battery Replacement: 步骤 7 中的图像 3，3

    • Desolder the contacts where the battery connects to the circuit board.

    • Straighten the battery contacts and pull them through the opposite side of the circuit board.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

作者

与4其他贡献者

Ben Gibbs

于02/16/16注册

361 声望

创作了3篇指南

徽章: 6

+ 3更多徽章

团队

IUPUI, Team 3-2, Harley Spring 2016 IUPUI, Team 3-2, Harley Spring 2016 的会员

IUPUI-HARLEY-S16S3G2

4 名成员

创作了3篇指南

2条评论

The replacement battery I bought had contact strips that were too long and too wide for the slots on the circuit board, so I had to trim off about half the length and 1.5 mm of the width on each strip, but after that alteration, it worked fine.

Tom Hess - 回复

What size is the Rechargeable Battery in the Norelco 5801XL .

Dave - 回复

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 18

过去 30 天： 50

总计 4,009