修复你的物品 社区 商店

Patching a Bicycle Tire Inner Tube

简介

You will be taking the wheel off of your bike, removing the tire from the wheel, and patching the hole.

Notes:

  • Make sure that the wheel is fully deflated throughout the process, except for finding the hole.
  • When applying the rubber cement to the hole the thinner the layer the better, for faster drying.

你所需要的

  1. Patching a Bicycle Tire Inner Tube, Inner Tube: 步骤 1 中的图像 1，1

    • Press the valve core while applying pressure to the tire to deflate the tire.

    翻译

  2. Patching a Bicycle Tire Inner Tube: 步骤 2 中的图像 1，2 Patching a Bicycle Tire Inner Tube: 步骤 2 中的图像 2，2

    • Insert the flat part of a tire lever under the tire coping. Apply pressure to the other end of the lever to lift the tire up and out of the wheel.

    • Slide the lever around the circumference of the wheel to completely remove the tire.

    • Alternatively, if you have multiple tire levers, see if you can clip the first lever to a spoke to keep it in place. Then insert the second lever a few inches away. Clip it to a spoke. Insert the third lever a few more inches along. Take out the second lever and insert it it a few inches past the third. Work along the rim until the tire pops off.

    翻译

  3. Patching a Bicycle Tire Inner Tube: 步骤 3 中的图像 1，1

    • Remove the tube by pushing the valve through the hole in the rim and pulling the tube out from under the tire.

    翻译

  4. Patching a Bicycle Tire Inner Tube, Patching a Bicycle Tire Inner Tube: 步骤 4 中的图像 1，2 Patching a Bicycle Tire Inner Tube, Patching a Bicycle Tire Inner Tube: 步骤 4 中的图像 2，2

    • Locate the leak by first over inflating the tire.

    • Place the tire under water and look for bubbles to find the leak.

    翻译

  6. Patching a Bicycle Tire Inner Tube: 步骤 5 中的图像 1，1

    • Mark the hole with a marker, and completely deflate the tire.

    翻译

  7. Patching a Bicycle Tire Inner Tube: 步骤 6 中的图像 1，1

    • Select a patch kit that you will use to patch the hole. Try to pick a patch that is appropriate for the size of the hole.

    翻译

  8. Patching a Bicycle Tire Inner Tube: 步骤 7 中的图像 1，1

    • Clean the area near the hole with soap and water, then dry it thoroughly.

    • Rough up the area around the hole with an abrasive surface such as sand paper until the area around the leak loses its shine.

    翻译

  9. Patching a Bicycle Tire Inner Tube: 步骤 8 中的图像 1，1

    • Apply rubber cement to an area around the hole that is bigger than the patch to ensure that the patch bonds completely.

    翻译

  10. Patching a Bicycle Tire Inner Tube: 步骤 9 中的图像 1，1

    • Apply the patch to the area.

    翻译

  11. Patching a Bicycle Tire Inner Tube: 步骤 10 中的图像 1，1

    • Apply pressure to the patch until the rubber cement is dry.

    翻译
结论

To reassemble your bike, follow these directions from step 6

另外一个人完成了本指南。

作者

与5其他贡献者

Brett Hartt

于04/12/10注册

127,897 声望

创作了143篇指南

徽章: 52

+ 49更多徽章

团队

iFixit iFixit 的会员

Staff

135 名成员

创作了16,817篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 3

过去 30 天： 10

总计 1,851