加入维修社区 - 创建账户

简介

Use this guide in order to correctly replace the display screen on the charging base of the device. Display screens may become cracked or dysfunctional due to normal wear or accidents. By replacing the display, users will be able to operate features such as caller ID more easily.

你所需要的

步骤 1 Base Display Screen

Panasonic KX-TG6641 Base Display Screen Replacement, Base Display Screen: 步骤 1 中的图像 1，1

Use a Phillips #0 screwdriver to remove five screws from the back cover.

编辑

询问修复机器人

步骤 2

To remove the back cover, use an iFixit opening tool and wedge the tool in between the loosened back charging case and the front plate.
Wiggle to loosen, be careful to not pry too hard as it could cause damage.

编辑

询问修复机器人

步骤 3

To access the display screen, use a Phillips #0 screwdriver to remove the screw on the bottom right corner of the electrical panel.
Unclip the wires hooked into the base.
It's not necessary to desolder the wires.

编辑

询问修复机器人

步骤 4

Disconnect the two phone cable connectors.
Use a Phillips #0 to remove the screw that is fixed in the plastic holder for the connectors.

编辑

询问修复机器人

步骤 5

Move the electrical panel to the side.
Use a Phillips #0 to remove the four screws from the brown board and lift it to access the display screen.
Be aware, there is a screw under the control panel, it is indicated with the central red circle.