简介
Need to access the interior. Here's how to take off the case to do that.
配件
无需配件。
-
Position the phone so the screen faces down.
-
Remove the stylus found on the back of the phone.
-
To remove the battery cover, hold down the button in the middle of the phone's back.
-
Slide the cover down to remove. Set the cover aside.
-
Lift the edge of the battery, separating contact points, and pull out as pictured.
-
Remove the small round rubber cover on the back of the phone located immediately below the antenna.
-
Unscrew six black 6.9 mm Torx screws with a T5 Torx Screwdriver.
-
Unscrew one 9.75 mm Phillips antenna screw with a Phillips #00 Screwdriver.
-
Pull out antenna.
-
Pry the back cover off using a spudger or similar tool.
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
2等其他人完成本指南。
团队
Cal Poly, Team 19-3, Maness Fall 2009 Cal Poly, Team 19-3, Maness Fall 2009 的会员
CPSU-MANESS-F09S19G3
4 名成员
创作了18篇指南
