跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的7指南

英语
中文

正翻译步骤 2

步骤 2
Remove the six 6.9 mm screws around the back plate with a T5 Torx screwdriver. Remove the single 9.8 mm screw next to the antennae on the back plate using a Phillips #00 screwdriver.
  • Remove the six 6.9 mm screws around the back plate with a T5 Torx screwdriver.

  • Remove the single 9.8 mm screw next to the antennae on the back plate using a Phillips #00 screwdriver.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可