修复你的物品 社区 商店

OnePlus 6T Speaker Replacement

撰写者： Quinn Jones (和另外3个贡献者)
  • 评论： 2
  • 收藏 0
  • 完成 3

难度

中等

步骤

6

所需时间

15 - 20 分钟

节

2

标志

1

Better Introduction

更好的介绍

通过完成或修改其开头介绍以改善本指南。

简介

If the audio coming from your OnePlus 6T speakers sounds distorted and troubleshooting doesn’t work, you may need to replace your speakers.

  1. Make sure the phone is powered off and placed with the back cover facing towards you on a stable surface.

    • Make sure the phone is powered off and placed with the back cover facing towards you on a stable surface.

    翻译

  2. Pop open the SIM card tray by inserting a SIM card removal tool into a small hole on the upper-left side of the phone.

    • Pop open the SIM card tray by inserting a SIM card removal tool into a small hole on the upper-left side of the phone.

    • Carefully remove the SIM card from its tray.

    翻译

  4. Loosen the binding glue within the phone using a hairdryer or an iOpener.

    • Loosen the binding glue within the phone using a hairdryer or an iOpener.

    • If you choose to use a hairdryer, hold the dryer at least eight inches from the phone and apply heat for two minutes in a circular motion around the edges of the phone.

    翻译

  5. Insert a Jimmy under one of the heated corners of the phone to lift it slightly. Insert a plastic card underneath the slightly lifted lip on the back cover and gently glide the card under the lifted phone casing. There will be a small amount of tension, but this is normal as the card is removing the adhesive within the phone.

    • Insert a Jimmy under one of the heated corners of the phone to lift it slightly.

    • Insert a plastic card underneath the slightly lifted lip on the back cover and gently glide the card under the lifted phone casing.

    • There will be a small amount of tension, but this is normal as the card is removing the adhesive within the phone.

    • Remove the back cover from the phone.

    • Use high concentration (>90%) isopropyl alcohol and a lint-free cloth to remove all adhesive residue from the back cover and the frame.

    翻译

  6. Remove seven 3mm Phillips #00 screws from the speaker.

    • Remove seven 3mm Phillips #00 screws from the speaker.

    翻译

  7. Use a spudger to lift and remove the speaker.

    • Use a spudger to lift and remove the speaker.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

作者

与3其他贡献者

Quinn Jones

于2019年10月15日注册

124 信誉积分

撰写一个指南

徽章: 6

+ 3更多徽章

团队

Grand Valley State University, Team S4-G6, DeVasto Fall 2019 Grand Valley State University, Team S4-G6, DeVasto Fall 2019 的会员

GVSU-DEVASTO-F19S4G6

4 名成员

创作了17篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时： 2

过去的7天： 11

过去的30天： 51

总计 1,702