Nintendo 3DS Circle Pad Joystick Replacement - iFixit 维修指南

简介

Circle pad joystick prerequisite.

你所需要的

步骤 1 Circle Pad Joystick

Nintendo 3DS Circle Pad Joystick Replacement, Circle Pad Joystick: 步骤 1 中的图像 1，1

Remove the two 7.7 mm Phillips screws securing the back of the Circle Pad to the motherboard.

步骤 2

Nintendo 3DS Circle Pad Joystick Replacement: 步骤 2 中的图像 1，3

Nintendo 3DS Circle Pad Joystick Replacement: 步骤 2 中的图像 2，3

Nintendo 3DS Circle Pad Joystick Replacement: 步骤 2 中的图像 3，3

Use the flat end of a spudger to pry the back of the Circle Pad off the motherboard.
Lift the Circle Pad joystick off the motherboard and lay it on its back so that the ribbon cable connector is accessible.

步骤 3

Nintendo 3DS Circle Pad Joystick Replacement: 步骤 3 中的图像 1，3

Nintendo 3DS Circle Pad Joystick Replacement: 步骤 3 中的图像 2，3

Nintendo 3DS Circle Pad Joystick Replacement: 步骤 3 中的图像 3，3

Use the flat end of a spudger or your fingernail to flip up the retaining flap on the Circle Pad ribbon cable ZIF socket.
Be sure you are prying up on the hinged retaining flap, not the socket itself.
Lift the Circle Pad joystick off the motherboard.

步骤 4

Nintendo 3DS Circle Pad Joystick Replacement: 步骤 4 中的图像 1，2

Nintendo 3DS Circle Pad Joystick Replacement: 步骤 4 中的图像 2，2

To decrease the chance of losing it during repairs, you may want to remove the two thin pads underneath the Circle Pad joystick.
Use a spudger or screwdriver to lift the pads up and remove them from the device.

结论

To reassemble your device, follow these instructions in reverse order.

作者

与2其他贡献者

David Hodson

于04/13/10注册

150,503 声望

创作了127篇指南

+ 50更多徽章

0条评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 361