修复你的物品 社区 商店

Ninja Coffee Bar® Single-Serve System Water Regulating Valve Replacement

简介

This is very similar to replacing the tubes in the device, which is show in another repair guide created for the ninja coffee bar. Be very careful with the screws because they are very small. We would suggest the magnetic mat provided by iFixit so you don't lose the screws. Just like the tube repair guide, be careful removing the protective plate because there are a lot of wires that can not be disconnected. Also, make sure to take some pictures of the wiring just incase some of them do slip loose.

你所需要的

  1. Ninja Coffee Bar® Single-Serve System Water Regulating Valve Replacement, Valve: 步骤 1 中的图像 1，1

    • Unscrew eight 6mm screws with Phillips head #1 screwdriver

    • Remove bottom cover

    编辑

  3. Ninja Coffee Bar® Single-Serve System Water Regulating Valve Replacement: 步骤 2 中的图像 1，1

    • Unscrew three 6mm screws with Phillips head #1 screwdriver

    • Remover tube protection plate

    编辑

  4. Ninja Coffee Bar® Single-Serve System Water Regulating Valve Replacement: 步骤 3 中的图像 1，2 Ninja Coffee Bar® Single-Serve System Water Regulating Valve Replacement: 步骤 3 中的图像 2，2

    • Detach valve tubes from valve by squeezing pins and pull tubes away from valve

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

与3其他贡献者

Naser Aldousari

于10/10/17注册

310 声望

创作了3篇指南

徽章: 8

+ 5更多徽章

团队

USF Tampa, Team S13-G69, Cagle Fall 2017 USF Tampa, Team S13-G69, Cagle Fall 2017 的会员

USFT-CAGLE-F17S13G69

4 名成员

创作了3篇指南

2条评论

Where can I get the replacement water valve?

Mark Peters - 回复

Anyone have a source for the valve?

ErrorCode67 - 回复

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 4

过去 30 天： 14

总计 1,918