修复你的物品 社区 商店

Nikon Coolpix L330 LCD Screen Replacement

简介

This guide will show you how to access the LCD screen to replace it, or simply clean dust from under the clear plastic cover.

你所需要的

  1. Nikon Coolpix L330 LCD Screen Replacement, Back Housing: 步骤 1 中的图像 1，3 Nikon Coolpix L330 LCD Screen Replacement, Back Housing: 步骤 1 中的图像 2，3 Nikon Coolpix L330 LCD Screen Replacement, Back Housing: 步骤 1 中的图像 3，3

    • There are six screws attaching the back housing to the camera. Remove the screws from the body with a PH000 screw head.

    • Two 1.5x2.5mm screws on the right side.

    • Two 1.5x2.5mm screws on the underside.

    • Two 1.5x2.5mm screw on the left side.

    编辑

  2. Nikon Coolpix L330 LCD Screen Replacement: 步骤 2 中的图像 1，2 Nikon Coolpix L330 LCD Screen Replacement: 步骤 2 中的图像 2，2

    • After removing the screws, use a metal spudger or plastic opening tool to push the back cover out.

    • The metal spudger can damage the plastic housing, so use caution when applying any pressure to it. Use a plastic opening tool to reduce the risk of damage to the housing.

    • Remove the back housing of the camera by lifting it directly up.

    • The back cover may be slightly tight, therefore more force may be needed to lift it up.

    编辑

  4. Nikon Coolpix L330 LCD Screen Replacement, LCD Screen: 步骤 3 中的图像 1，2 Nikon Coolpix L330 LCD Screen Replacement, LCD Screen: 步骤 3 中的图像 2，2

    • Insert the tips of your fingers into the space between the screen and back-plate.

    • Gently lift the screen up and out of the frame.

    • The screen is still held by a flexible display cable, therefore only lift the screen 0.5'' out of the back-plate.

    编辑

  5. Nikon Coolpix L330 LCD Screen Replacement: 步骤 4 中的图像 1，2 Nikon Coolpix L330 LCD Screen Replacement: 步骤 4 中的图像 2，2

    • Tilt the screen so that the display cable forms a hinge with the backplate.

    • Rotate the display 180 degrees so that it faces you.

    编辑

  6. Nikon Coolpix L330 LCD Screen Replacement: 步骤 5 中的图像 1，3 Nikon Coolpix L330 LCD Screen Replacement: 步骤 5 中的图像 2，3 Nikon Coolpix L330 LCD Screen Replacement: 步骤 5 中的图像 3，3

    • The display cable has a ZIF (zero insertion force) connector on the end. This has a tab that has to be pushed out before the cable can be safely removed.

    • Using a plastic opening tool or fingernail, pop up the black clip holding the display cable. This will release the cable.

    • Slide the display cable out of the connector.

    • The display cable can be damaged due to excessive bending, therefore avoid putting unnecessary strain on it.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

5等其他人完成本指南。

作者

与1其他贡献者

Rajeev

于02/09/16注册

596 声望

创作了4篇指南

徽章: 11

+ 8更多徽章

团队

USF Tampa, Team 2-10, Cagle Spring 2016 USF Tampa, Team 2-10, Cagle Spring 2016 的会员

USFT-CAGLE-S16S2G10

4 名成员

创作了14篇指南

一条评论

Thank you, saved me money and time

Mihai Alexandru Fustos - 回复

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 7

过去 30 天： 14

总计 1,788