修复你的物品 社区 商店

Nest x Yale Lock Keypad Replacement

简介

If your Nest x Yale lock is related to any of the issues on the unresponsive section of your troubleshooting page, you may need to replace the touchpad. Use this guide to replace the keypad properly.

The touchpad is located inside the keypad. This touchpad is responsible for being able to input your code to unlock the door lock.

Before beginning this process, be sure that the device is off and not plugged into the lock.

你所需要的

  1. Nest x Yale Lock Keypad Replacement, Keypad: 步骤 1 中的图像 1，1

    • Unscrew all available screws that you can see from the back.

    • The screws are 0.25 inches phillips screws.

    • Make sure to not lose any of the screws, and keep track of them.

    编辑

  2. Nest x Yale Lock Keypad Replacement: 步骤 2 中的图像 1，1

    • Once you have unscrewed all the screws carefully remove the metal covering.

    • Make sure that the wire safely goes through the hole.

    编辑

  4. Nest x Yale Lock Keypad Replacement: 步骤 3 中的图像 1，1

    • Then once again unscrew the two screws that you see.

    • The screws have a height of 0.2 inches phillips screws.

    • Make sure to not lose any of the screws, and keep track of them.

    编辑

  5. Nest x Yale Lock Keypad Replacement: 步骤 4 中的图像 1，2 Nest x Yale Lock Keypad Replacement: 步骤 4 中的图像 2，2

    • Once all screws are unscrewed proceed to tap the screen out of the metal casing.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与3其他贡献者

Christopher Gonzalez

于09/26/22注册

313 声望

创作了3篇指南

徽章: 4

+1个徽章

团队

CSU Los Angeles, Team 5-3, Adachi Fall 2022 CSU Los Angeles, Team 5-3, Adachi Fall 2022 的会员

CSULA-ADACHI-F22S5G3

5 名成员

创作了5篇指南

1指南评论

Where do you order the touchscreen from?

Mike Turrell - 回复

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 9

总计 457