修复你的物品 社区 商店

Motorola Moto G7 Play Speaker Replacement

简介

This guide will show each detailed step to removing and replacing the speaker inside Motorola G7 Play, model number XT1952-3 or XT1952-2. The speaker is used for phone calls and playing sound on the phone. If the phone no longer plays audio correctly or doesn’t have any audio the speaker will need to be replace.

Before you begin, download the Rescue and Smart Assistant app to backup your device and diagnose whether your problem is software or hardware related.

你所需要的

  1. Motorola Moto G7 Play Speaker Replacement, Back Cover: 步骤 1 中的图像 1，2 Motorola Moto G7 Play Speaker Replacement, Back Cover: 步骤 1 中的图像 2，2

    • Turn off your device before you begin.

    • Use the iFixit pick to break the adhesive around the back case.

    • Use a heat gun, hairdryer, or iOpener to weaken the adhesive around the back case. If you're using the iOpener, please review the instructions for proper use.

    编辑

  2. Motorola Moto G7 Play Speaker Replacement: 步骤 2 中的图像 1，1

    • Detach the back case from the phone.

    • Make sure the back is opened right to left so the cable of the fingerprint scanner does not get damaged.

    编辑

  3. Motorola Moto G7 Play Speaker Replacement: 步骤 3 中的图像 1，2 Motorola Moto G7 Play Speaker Replacement: 步骤 3 中的图像 2，2

    • Use the iFixit pick and the iFixit opening tool to pull the fingerprint scanner off of the back case.

    编辑

  5. Motorola Moto G7 Play Speaker Replacement, Motherboard: 步骤 4 中的图像 1，1

    • Remove the nine 3.2mm screws from the motherboard cover with a Phillips #00 screwdriver.

    编辑

  6. Motorola Moto G7 Play Speaker Replacement: 步骤 5 中的图像 1，1

    • Lift motherboard cover off by the bottom.

    • Use reverse tweezers or a similar tool if needed.

    编辑

  7. Motorola Moto G7 Play Speaker Replacement: 步骤 6 中的图像 1，2 Motorola Moto G7 Play Speaker Replacement: 步骤 6 中的图像 2，2

    • Once the motherboard cover is removed, disconnect the four ribbon cables and the two wires attached to the motherboard.

    编辑

  8. Motorola Moto G7 Play Speaker Replacement: 步骤 7 中的图像 1，2 Motorola Moto G7 Play Speaker Replacement: 步骤 7 中的图像 2，2

    • Using the Phillips #00 screwdriver, remove the single 0.4 mm black screw in the center of the motherboard.

    • Remove the motherboard from the device.

    编辑

  9. Motorola Moto G7 Play Speaker Replacement, Speaker: 步骤 8 中的图像 1，2 Motorola Moto G7 Play Speaker Replacement, Speaker: 步骤 8 中的图像 2，2

    • Use the spudger to remove the speaker from the top of the phone.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

2条评论

Nice guide to repair any mobile phone

Fisseha Desta - 回复

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 2

过去 30 天： 15

总计 1,164