跳转到主内容

简介

The speaker is a vital component of your Motorola MC5590. It signifies a successful scan, and you may feel lost without it. But do not worry, because we can show you how to replace a faulty speaker!

  1. Push in the battery release button.
    • Push in the battery release button.

  2. Pull out battery.
    • Pull out battery.

  3. Remove the two rubber plugs on the top of the device by pushing them up and out of the phone. Remove the two rubber plugs on the top of the device by pushing them up and out of the phone.
    • Remove the two rubber plugs on the top of the device by pushing them up and out of the phone.

  4. Remove the four 1cm Phillips #0 screws from the top and bottom of the phone. Remove the four 1cm Phillips #0 screws from the top and bottom of the phone. Remove the four 1cm Phillips #0 screws from the top and bottom of the phone.
    • Remove the four 1cm Phillips #0 screws from the top and bottom of the phone.

  5. Use a plastic opening tool to remove the keyboard cover by prying up on its perimeter.
    • Use a plastic opening tool to remove the keyboard cover by prying up on its perimeter.

  6. iPhone 电池维修工具包

    只要 $29.99

    Buy Now

    iPhone 电池维修工具包

    只要 $29.99

    Buy Now
  7. Remove the eight 4mm Phillips #00 screws from the keyboard cover. Remove the eight 4mm Phillips #00 screws from the keyboard cover.
    • Remove the eight 4mm Phillips #00 screws from the keyboard cover.

  8. Remove the keyboard cover.
    • Remove the keyboard cover.

  9. Use a spudger to flip up the retaining flap on the keyboard ribbon cable ZIF socket. Pull the ribbon cable out of the socket. Pull the ribbon cable out of the socket.
    • Use a spudger to flip up the retaining flap on the keyboard ribbon cable ZIF socket.

    • Pull the ribbon cable out of the socket.

  10. Use a spudger to flip up the retaining flap on the display ribbon cable ZIF socket. Remove the keyboard from the device.
    • Use a spudger to flip up the retaining flap on the display ribbon cable ZIF socket.

    • Remove the keyboard from the device.

  11. Pull the black rubber tabs up gently and remove them. Pull the black rubber tabs up gently and remove them.
    • Pull the black rubber tabs up gently and remove them.

  12. Using your finger, or spudger, push the motherboard out from the bottom. Using your finger, or spudger, push the motherboard out from the bottom.
    • Using your finger, or spudger, push the motherboard out from the bottom.

  13. Remove the three Phillips #00 screws from the motherboard: Two 3mm screws.
    • Remove the three Phillips #00 screws from the motherboard:

    • Two 3mm screws.

    • One 1mm screw.

  14. Disconnect the speaker from the motherboard. Disconnect the speaker from the motherboard.
    • Disconnect the speaker from the motherboard.

结论

To reassemble your device, follow these instructions in reverse order.

Tyler Jean

于2018年02月22日注册

555 信誉积分

创作了5篇指南

团队

USF Tampa, Team S1-G6, Cagle Spring 2018 USF Tampa, Team S1-G6, Cagle Spring 2018 的会员

USFT-CAGLE-S18S1G6

4 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 63