修复你的物品 社区 商店

Motorola Droid RAZR Camera Cover Replacement

简介

Replace a cracked or broken camera cover with a shiny new one.

你所需要的

  1. Motorola Droid RAZR Camera Cover Replacement, Back Cover: 步骤 1 中的图像 1，2 Motorola Droid RAZR Camera Cover Replacement, Back Cover: 步骤 1 中的图像 2，2

    • Insert a plastic opening tool between the back cover and rear case at the lower left edge of the back cover.

    • Pry the back cover up with the plastic opening tool to free the plastic clips.

    • Continue prying along the left edge of the back cover towards the top of the phone.

    编辑

  2. Motorola Droid RAZR Camera Cover Replacement: 步骤 2 中的图像 1，3 Motorola Droid RAZR Camera Cover Replacement: 步骤 2 中的图像 2，3 Motorola Droid RAZR Camera Cover Replacement: 步骤 2 中的图像 3，3

    • Work the plastic opening tool across the top of the back case to free the plastic clips.

    • The top edge of the back case is very thin. Pry carefully to avoid cracking or snapping it.

    • Continue prying down the right side of the back cover to free the remaining clips.

    编辑

  3. Motorola Droid RAZR Camera Cover Replacement: 步骤 3 中的图像 1，3 Motorola Droid RAZR Camera Cover Replacement: 步骤 3 中的图像 2，3 Motorola Droid RAZR Camera Cover Replacement: 步骤 3 中的图像 3，3

    • Pull the back cover away from the phone to remove it.

    • The back cover is attached to the battery with a generous amount of adhesive, so you may have to use quite a bit of force to separate the two pieces.

    • The battery must remain in the phone and not come off with the back cover or you will break the power lead.

    • Since the back cover is made of Kevlar, it can handle a fair amount of twisting and tugging without breaking.

    编辑

  5. Motorola Droid RAZR Camera Cover Replacement, Battery: 步骤 4 中的图像 1，2 Motorola Droid RAZR Camera Cover Replacement, Battery: 步骤 4 中的图像 2，2

    • Use the tip of a spudger to lift up the red silicone cover over the battery terminal screws and remove it.

    编辑

  6. Motorola Droid RAZR Camera Cover Replacement: 步骤 5 中的图像 1，3 Motorola Droid RAZR Camera Cover Replacement: 步骤 5 中的图像 2，3 Motorola Droid RAZR Camera Cover Replacement: 步骤 5 中的图像 3，3

    • Remove the two 3.3 mm T5 Torx battery terminal screws.

    • Grab the blue battery removal tab and lift the battery out to remove it.

    • There is quite a bit of adhesive securing the battery to the motherboard. Work slowly to avoid deforming the battery.

    • Your phone will have a number of metal EMI shields on the motherboard, rather than the bare ICs seen here.

    编辑

  7. Motorola Droid RAZR Camera Cover Replacement, Camera Cover: 步骤 6 中的图像 1，2 Motorola Droid RAZR Camera Cover Replacement, Camera Cover: 步骤 6 中的图像 2，2

    • Use a heat gun or hair dryer to soften the adhesive underneath the camera cover.

    • The following steps were performed without the use of a heat gun. Notice that the camera cover cracks very easily if you do not heat the adhesive that holds it in place.

    • Gently pry up the bottom edge of the camera cover with a plastic opening tool.

    • Carefully slide the plastic opening tool across the bottom edge to free it from the adhesive.

    • Continue to use the heat gun as needed to soften the adhesive as you remove the camera cover.

    编辑

  8. Motorola Droid RAZR Camera Cover Replacement: 步骤 7 中的图像 1，3 Motorola Droid RAZR Camera Cover Replacement: 步骤 7 中的图像 2，3 Motorola Droid RAZR Camera Cover Replacement: 步骤 7 中的图像 3，3

    • Insert the plastic opening tool underneath the top edge of the camera cover.

    • Gently pry the camera cover up as you slide the plastic opening tool across the top edge to free it from the adhesive.

    • Remove the camera cover.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

与1其他贡献者

David Hodson

于04/13/10注册

150,493 声望

创作了127篇指南

徽章: 53

+ 50更多徽章

0条评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 1

过去 30 天： 3

总计 4,732