修复你的物品 社区 商店

Moto C Daughterboard Replacement

简介

Use this guide to replace the daughterboard in the Motorola Moto C.

Before you begin, download the Rescue and Smart Assistant app to backup your device and diagnose whether your problem is software or hardware related.

你所需要的

  1. Moto C Daughterboard Replacement, Back Cover: 步骤 1 中的图像 1，3 Moto C Daughterboard Replacement, Back Cover: 步骤 1 中的图像 2，3 Moto C Daughterboard Replacement, Back Cover: 步骤 1 中的图像 3，3

    • Power off your phone before beginning disassembly.

    • Insert a thumbnail, or spudger, into the notch on the bottom right corner to start separating the phone unit from the back cover.

    • Move it to the bottom left corner and pry the phone unit out of the back cover until you can get a good grip.

    编辑

  2. Moto C Daughterboard Replacement: 步骤 2 中的图像 1，2 Moto C Daughterboard Replacement: 步骤 2 中的图像 2，2

    • Lift the phone out of the back cover.

    编辑

  3. Moto C Daughterboard Replacement, Battery: 步骤 3 中的图像 1，3 Moto C Daughterboard Replacement, Battery: 步骤 3 中的图像 2，3 Moto C Daughterboard Replacement, Battery: 步骤 3 中的图像 3，3

    • Use a finger or spudger to lever the battery out of its recess and remove it.

    编辑

  4. Moto C Daughterboard Replacement, Daughterboard Cover: 步骤 4 中的图像 1，1

    • Remove the four 3.5 mm long Torx T5 screws.

    • Some screws might be covered with stickers.

    编辑

  6. Moto C Daughterboard Replacement: 步骤 5 中的图像 1，3 Moto C Daughterboard Replacement: 步骤 5 中的图像 2，3 Moto C Daughterboard Replacement: 步骤 5 中的图像 3，3

    • Apply the edge of an opening pick to the bottom right corner under the daughterboard cover.

    • Twist the opening pick to open the plastic clamps of the daughterboard cover.

    • Slide the opening pick to the left and pry it upwards until you can get a good grip on the daughterboard cover.

    编辑

  7. Moto C Daughterboard Replacement: 步骤 6 中的图像 1，1

    • Remove the daughterboard cover.

    编辑

  8. Moto C Daughterboard Replacement, Daughterboard: 步骤 7 中的图像 1，2 Moto C Daughterboard Replacement, Daughterboard: 步骤 7 中的图像 2，2
    在这个步骤中使用的工具：
    Tweezers
    $4.99
    购买

    • Use a pair of tweezers to disconnect the antenna cable on the left of the daughterboard.

    编辑

  9. Moto C Daughterboard Replacement: 步骤 8 中的图像 1，2 Moto C Daughterboard Replacement: 步骤 8 中的图像 2，2

    • Use a spudger to disconnect the digitizer flex cable on the upper left of the daughterboard.

    编辑

  10. Moto C Daughterboard Replacement: 步骤 9 中的图像 1，2 Moto C Daughterboard Replacement: 步骤 9 中的图像 2，2

    • Use a pair of tweezers to remove the rubber gasket that covers the microphone on the bottom right of the daughterboard.

    编辑

  11. Moto C Daughterboard Replacement: 步骤 10 中的图像 1，1

    • Prepare an iOpener and apply it to the bottom part of the display for at least two minutes to loosen the adhesive beneath the daughterboard.

    编辑

  12. Moto C Daughterboard Replacement: 步骤 11 中的图像 1，3 Moto C Daughterboard Replacement: 步骤 11 中的图像 2，3 Moto C Daughterboard Replacement: 步骤 11 中的图像 3，3

    • Apply an opening pick to the bottom right corner of the daughterboard.

    • Carefully slide the opening pick under the daughterboard to cut the adhesive underneath.

    • Slide the opening pick from right to left to cut all the adhesive.

    编辑

  13. Moto C Daughterboard Replacement: 步骤 12 中的图像 1，2 Moto C Daughterboard Replacement: 步骤 12 中的图像 2，2

    • Twist the opening pick to lift the daughterboard until you can get a good grip.

    • Remove the daughterboard.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

Apply new adhesive where it’s necessary.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Check out our Answers community for troubleshooting help.

作者

与3其他贡献者

Dominik Schnabelrauch

于11/23/16注册

204,262 声望

创作了682篇指南

徽章: 40

+ 37更多徽章

团队

iFixit iFixit 的会员

Staff

135 名成员

创作了17,243篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 3

过去 30 天： 7

总计 396