Mitsubishi Hands Free Module Firmware Update (AM/FM-ST Electronic Tuning Radio, CD Player with Touch)

简介

This guide provides step-by-step instructions to update the firmware of your Mitsubishi Hands Free Module (HFM). By keeping your HFM's firmware up to date, you ensure optimal performance, compatibility with new devices, and access to the latest features.

Note that once the update is completed, the system will be reset and the following information will be deleted:

Phone book data
Pairing data
Voice Recognition data

你所需要的

步骤 1 Enter the Service Menu

Mitsubishi Hands Free Module Firmware Update (AM/FM-ST Electronic Tuning Radio, CD Player with Touch), Enter the Service Menu: 步骤 1 中的图像 1，2

Mitsubishi Hands Free Module Firmware Update (AM/FM-ST Electronic Tuning Radio, CD Player with Touch), Enter the Service Menu: 步骤 1 中的图像 2，2

While holding the MENU button, press the segment on the display marked in red briefly.
Press and hold the segment of the display marked in orange for at least two seconds, while still holding the MENU button.

编辑

步骤 2 Navigate the Service Menu

Mitsubishi Hands Free Module Firmware Update (AM/FM-ST Electronic Tuning Radio, CD Player with Touch), Navigate the Service Menu: 步骤 2 中的图像 1，2

Mitsubishi Hands Free Module Firmware Update (AM/FM-ST Electronic Tuning Radio, CD Player with Touch), Navigate the Service Menu: 步骤 2 中的图像 2，2

Press on Hands Free Module.
While the Hands Free Module is in diagnosis mode, the sound input to the microphone unit is output directly through the speaker.
Check the Parts Number.
We'll need this later when downloading the Firmware file.
Check the Version Number.
If the Version Number is 19.00.000 you already have the last available Firmware installed and don't need to do anything.

编辑

步骤 3 Download the Firmware

Mitsubishi Hands Free Module Firmware Update (AM/FM-ST Electronic Tuning Radio, CD Player with Touch), Download the Firmware: 步骤 3 中的图像 1，2

Mitsubishi Hands Free Module Firmware Update (AM/FM-ST Electronic Tuning Radio, CD Player with Touch), Download the Firmware: 步骤 3 中的图像 2，2

You can download the firmware files here: Version 19.0.0 (Europe) and Version 19.0.0 (Japan and North America).
Check if the Firmware Version works with your device.
Download the Firmware for your device.
Press on SHOW ALL.
Download update.package.

编辑

步骤 4 Move the File

Mitsubishi Hands Free Module Firmware Update (AM/FM-ST Electronic Tuning Radio, CD Player with Touch), Move the File: 步骤 4 中的图像 1，1

The flash drive needs to be formatted to FAT32 and should not be larger than 16GB. Additionally the head unit can be a bit picky and might not accept all flash drives. If it can't read your flash drive, just try a different one.
Copy the update.package file to the root directory of the USB flash drive.

编辑

步骤 5 Insert the flash drive

Mitsubishi Hands Free Module Firmware Update (AM/FM-ST Electronic Tuning Radio, CD Player with Touch), Insert the flash drive: 步骤 5 中的图像 1，1

Insert the USB flash drive into one of the USB ports in your car.
You can usually find a USB port inside the center console or below the head unit.

编辑

步骤 6 Initiate the Update

Mitsubishi Hands Free Module Firmware Update (AM/FM-ST Electronic Tuning Radio, CD Player with Touch), Initiate the Update: 步骤 6 中的图像 1，2

Mitsubishi Hands Free Module Firmware Update (AM/FM-ST Electronic Tuning Radio, CD Player with Touch), Initiate the Update: 步骤 6 中的图像 2，2

Re-enter the Hands Free Module-Section of the Service Menu.
Press on the S/W-button.
If there is no S/W-button it means that the head unit didn't detect a valid file on the flash drive. This either means that you already have a version newer than the firmware file installed (as is the case for me), an incompatible firmware file, or that the system can't read the flash drive.
Confirm by pressing Yes.

编辑

步骤 7 Enter the Security PIN

Mitsubishi Hands Free Module Firmware Update (AM/FM-ST Electronic Tuning Radio, CD Player with Touch), Enter the Security PIN: 步骤 7 中的图像 1，2

Mitsubishi Hands Free Module Firmware Update (AM/FM-ST Electronic Tuning Radio, CD Player with Touch), Enter the Security PIN: 步骤 7 中的图像 2，2

Enter your Security PIN.
If you don't have one set you can just enter 1234.
If you have forgotten you Security PIN, you can forcibly remove it by pressing the Unlock-Button in the Hands Free Module-Section of the Service Menu.