简介

*In order to access the charging port, refer to steps 1 - 6 in the Microsoft Surface Pro Teardown Guide to remove the screen.

Teardown Guide

  1. Using a T5 Torx screwdriver, unscrew a total number of 23 screws located on the outside panel of the Surface Pro.
    • Using a T5 Torx screwdriver, unscrew a total number of 23 screws located on the outside panel of the Surface Pro.

    添加评论

  2. Use the plastic opening tool or fingers to pry out the front camera.
    • Use the plastic opening tool or fingers to pry out the front camera.

    添加评论

    • Lift the outside panel from the Surface Pro

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Use the T5 torx screw driver to unscrew the 6 T5 screws in the left and right outside metal panels

    • Use the T2 torx screw driver to unscrew the 23 T2 screws on the left and right outside metal panels

    添加评论

    • Pull out left and right metal panels with hands

    添加评论

    • Pull out the orange charging port strip using tweezers

    添加评论

    • Unscrew the two T5 torx screws located on each side of the charging port.

    添加评论

    • Once you have unscrewed the charging port, you can gently pull it out with your hands.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Jonathan Choi

于2013年10月09日注册

591 信誉积分

创作了4篇指南

团队

Cal Poly, Team 8-20, Regan Fall 2013 Cal Poly, Team 8-20, Regan Fall 2013 的会员

CPSU-REGAN-F13S8G20

4 名成员

创作了10篇指南

Where do you get a replacement charging port at?

Evil Robot - 回复

Agree where can you get the port?

J-M. M. - 回复

添加评论

浏览统计数据:

过去的24小时: 6

过去的7天: 43

过去的30天: 191

总计 9,659