修复你的物品 社区 商店

Microsoft Surface Pro 7 Kickstand Replacement

简介

Follow this guide to replace the kickstand on your Microsoft Surface Pro 7.

Some photos in this guide are from a different model and may contain slight visual discrepancies, but they won't affect the guide procedure.

你所需要的

  1. Microsoft Surface Pro 7 Kickstand Replacement, Open the kickstand: 步骤 1 中的图像 1，3 Microsoft Surface Pro 7 Kickstand Replacement, Open the kickstand: 步骤 1 中的图像 2，3 Microsoft Surface Pro 7 Kickstand Replacement, Open the kickstand: 步骤 1 中的图像 3，3

    • Lift the kickstand to expose the hinge screws.

    编辑

  2. Microsoft Surface Pro 7 Kickstand Replacement, Remove the kickstand screws: 步骤 2 中的图像 1，2 Microsoft Surface Pro 7 Kickstand Replacement, Remove the kickstand screws: 步骤 2 中的图像 2，2

    • Remove the four 2.7 mm T3 screws—two on each side of the kickstand.

    编辑

  4. Microsoft Surface Pro 7 Kickstand Replacement, Close the kickstand: 步骤 3 中的图像 1，3 Microsoft Surface Pro 7 Kickstand Replacement, Close the kickstand: 步骤 3 中的图像 2，3 Microsoft Surface Pro 7 Kickstand Replacement, Close the kickstand: 步骤 3 中的图像 3，3

    • Move the kickstand back down to a flat position.

    • The hinges are stiff and you may need to use some force to get it down.

    编辑

  5. Microsoft Surface Pro 7 Kickstand Replacement, Remove the kickstand: 步骤 4 中的图像 1，3 Microsoft Surface Pro 7 Kickstand Replacement, Remove the kickstand: 步骤 4 中的图像 2，3 Microsoft Surface Pro 7 Kickstand Replacement, Remove the kickstand: 步骤 4 中的图像 3，3

    • Remove the kickstand from the back cover.

    • There are two adhesive tabs in the middle of the kickstand that disengage most easily when the kickstand is pulled directly downward from the device.

    • Be sure to insert these tabs when reinstalling the new kickstand before replacing the screws.

    编辑
结论

To reassemble your device, follow the above steps in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

另外一个人完成了本指南。

作者

与1其他贡献者

Sam Omiotek

于02/25/19注册

92,346 声望

创作了290篇指南

徽章: 35

+ 32更多徽章

2指南评论

One of the hinges broke on my Surface Pro 6.

1. I removed the broken hinge, closed the kickstand and duct taped the seam.

2. I opened the kickstand wide and duct taped the seam.

The single hinge and duct tape seem to be working!

"Spare the duct tape, spoil the job." - Red Green

P Best - 回复

What are the parts used for this fix?

Andrea Shaw - 回复

添加评论

浏览统计数据:

过去 24 小时： 2

过去 7 天： 14

过去 30 天： 86

总计 9,404