跳转到主内容

Microsoft Surface 3 Audio Jack and MicroSD Slot Replacement

你所需要的

  1. Microsoft Surface 3 Audio Jack and MicroSD Slot Replacement, Casing: 步骤 1 中的图像 1,2 Microsoft Surface 3 Audio Jack and MicroSD Slot Replacement, Casing: 步骤 1 中的图像 2,2
    • Warm up an iOpener following the instructions found in the iOpener guide.

    • Place the warm iOpener on top of the edges of the screen. This heat will weaken the strength of the adhesive between the display and body.

  2. Microsoft Surface 3 Audio Jack and MicroSD Slot Replacement: 步骤 2 中的图像 1,2 Microsoft Surface 3 Audio Jack and MicroSD Slot Replacement: 步骤 2 中的图像 2,2
    • Use iFixit opening picks to wedge under the edge of the screen at the speaker port.

    • This may take significant force. A fingernail might work better for the initial lift

    • If you push straight down near the edge you will go through the speaker mesh and possibly end up damaging your speaker; try to push the pick in at a shallow angle.

  3. Microsoft Surface 3 Audio Jack and MicroSD Slot Replacement: 步骤 3 中的图像 1,2 Microsoft Surface 3 Audio Jack and MicroSD Slot Replacement: 步骤 3 中的图像 2,2
    • Carefully try to work your way around the device using the picks, reapplications of the heated iOpener, and luck.

    • If you break the glass on one side you might want to try again starting from the other side so that you have a clean, unbroken, edge on that side.

    • While the glass on this display is not particularly sharp when broken, it is still broken glass and you should be careful with it.

  4. Microsoft Surface 3 Audio Jack and MicroSD Slot Replacement: 步骤 4 中的图像 1,1
    • Flip the display over so that parts underneath it are easily accessible.

    • Do not pull out the display as it is still attached to the motherboard.

    • If you are replacing the display, or want it out of the way, continue with the display replacement guide steps.

  5. Microsoft Surface 3 Audio Jack and MicroSD Slot Replacement, Audio Jack and MicroSD Slot: 步骤 5 中的图像 1,1
    • You will be working in this area of the Surface 3 when replacing the audio jack and Micro SD port

  6. Microsoft Surface 3 Audio Jack and MicroSD Slot Replacement: 步骤 6 中的图像 1,1
    • Remove the black adhesive covering next to the audio jack in order to get to the screws underneath.

  7. Microsoft Surface 3 Audio Jack and MicroSD Slot Replacement: 步骤 7 中的图像 1,2 Microsoft Surface 3 Audio Jack and MicroSD Slot Replacement: 步骤 7 中的图像 2,2
    • Remove the silver bracket using the black pick in order to properly remove the entire audio jack.

  8. Microsoft Surface 3 Audio Jack and MicroSD Slot Replacement: 步骤 8 中的图像 1,2 Microsoft Surface 3 Audio Jack and MicroSD Slot Replacement: 步骤 8 中的图像 2,2
    • Remove the two 3/16" Torx #2 screws directly beside the audio jack.

  9. Microsoft Surface 3 Audio Jack and MicroSD Slot Replacement: 步骤 9 中的图像 1,2 Microsoft Surface 3 Audio Jack and MicroSD Slot Replacement: 步骤 9 中的图像 2,2
    • Remove the two 1/16" Torx #3 screws that hold in the MicroSD slot.

  10. Microsoft Surface 3 Audio Jack and MicroSD Slot Replacement: 步骤 10 中的图像 1,2 Microsoft Surface 3 Audio Jack and MicroSD Slot Replacement: 步骤 10 中的图像 2,2
    • Carefully remove the entire audio jack . It should look like the picture of the single part to the left.

结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

Andy Stone

于10/08/15注册

284 声望

创作了2篇指南

团队

Cal Poly, Team 5-12, Maness Fall 2015 Cal Poly, Team 5-12, Maness Fall 2015 的会员

CPSU-MANESS-F15S5G12

4 名成员

创作了18篇指南

2条评论

Hi,

What is microsd bus interface? UHS-1 or UHS-2

Or at least, does it have any manufacturer info on it?

kemal - 回复

Hi Guys,

Do you know where can I buy mini display port mounted on motherboard? I need aprox 100pcs.

Dan Bach - 回复

添加评论

浏览统计数据:

过去 24 小时: 1

过去 7 天: 17

过去 30 天: 52

总计 10,268