修复你的物品 社区 商店

MerchSource the Black Series Boat Racer Battery Cable Replacement

简介

This repair guide will show you how to replace the cable that connects the positive battery terminal to the circuit board within the remote controller for the MerchSource the Black Boat Series Boat Racers Device.

你所需要的

  1. MerchSource the Black Series Boat Racer Battery Cable Replacement, Battery Cable: 步骤 1 中的图像 1，2 MerchSource the Black Series Boat Racer Battery Cable Replacement, Battery Cable: 步骤 1 中的图像 2，2

    • Turn the remote controller over to the back.

    编辑

  2. MerchSource the Black Series Boat Racer Battery Cable Replacement: 步骤 2 中的图像 1，1

    • Slide the battery cover off.

    编辑

  4. MerchSource the Black Series Boat Racer Battery Cable Replacement: 步骤 3 中的图像 1，2 MerchSource the Black Series Boat Racer Battery Cable Replacement: 步骤 3 中的图像 2，2

    • Remove both AA-batteries.

    编辑

  5. MerchSource the Black Series Boat Racer Battery Cable Replacement: 步骤 4 中的图像 1，1

    • Use a Phillips #1 screwdriver, remove the four screws located in the four corners of the back of the remote controller.

    • Screw length is 6 mm.

    编辑

  6. MerchSource the Black Series Boat Racer Battery Cable Replacement: 步骤 5 中的图像 1，3 MerchSource the Black Series Boat Racer Battery Cable Replacement: 步骤 5 中的图像 2，3 MerchSource the Black Series Boat Racer Battery Cable Replacement: 步骤 5 中的图像 3，3

    • Separate the two halves of the remote controller.

    编辑

  7. MerchSource the Black Series Boat Racer Battery Cable Replacement: 步骤 6 中的图像 1，1

    • Solder the wire to reconnect it.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 3

过去 30 天： 6

总计 201