跳转到主内容

简介

If, after reading through this guide, you are still in need of assistance, please refer back to the device page or the troubleshooting page.

  1. Linksys WRT54G Motherboard Component Replacement, Antennas: 步骤 1 中的图像 1,1
    • Unfold the antennas straight away from the device.

  2. Linksys WRT54G Motherboard Component Replacement: 步骤 2 中的图像 1,3 Linksys WRT54G Motherboard Component Replacement: 步骤 2 中的图像 2,3 Linksys WRT54G Motherboard Component Replacement: 步骤 2 中的图像 3,3
    • Remove the black caps from the antennas by pulling them away from the device.

  3. Linksys WRT54G Motherboard Component Replacement: 步骤 3 中的图像 1,3 Linksys WRT54G Motherboard Component Replacement: 步骤 3 中的图像 2,3 Linksys WRT54G Motherboard Component Replacement: 步骤 3 中的图像 3,3
    • Unscrew each of the antennas from the wireless device.

  4. Linksys WRT54G Motherboard Component Replacement, Casing: 步骤 4 中的图像 1,2 Linksys WRT54G Motherboard Component Replacement, Casing: 步骤 4 中的图像 2,2
    • Using a bit of force, remove the blue plastic case.

  5. Linksys WRT54G Motherboard Component Replacement, Motherboard: 步骤 5 中的图像 1,2 Linksys WRT54G Motherboard Component Replacement, Motherboard: 步骤 5 中的图像 2,2
    • To remove the black casing that surrounds the green motherboard, slide the top half of the casing backwards. It only moves a very short distance.

    • Pull the top piece upwards and away from the bottom to remove.

  6. Linksys WRT54G Motherboard Component Replacement: 步骤 6 中的图像 1,2 Linksys WRT54G Motherboard Component Replacement: 步骤 6 中的图像 2,2
    • Locate the 2 M2.5x6mm screws that attach the motherboard to the back case.

    • Remove the two screws from the motherboard as indicated with the Phillips head screwdriver.

  7. Linksys WRT54G Motherboard Component Replacement: 步骤 7 中的图像 1,1
    • Once screws have been removed, slide the motherboard in the direction of its LED lights.

    • Lift motherboard up and away from the black lower casing.

  8. Linksys WRT54G Motherboard Component Replacement, Motherboard Component: 步骤 8 中的图像 1,1
    • Obtain a desoldering wick (Desoldering Braid). Plug in soldering iron and allow to heat. For soldering information, refer to the iFixit soldering guide (如何焊接和拆焊).

    • Make sure that the soldering iron is not resting on top of anything that would be damaged by the heat.

  9. Linksys WRT54G Motherboard Component Replacement: 步骤 9 中的图像 1,2 Linksys WRT54G Motherboard Component Replacement: 步骤 9 中的图像 2,2
    • Identify the functional component which will be removed.

    • Turn the board over so that the pins holding the component in are exposed.

  10. Linksys WRT54G Motherboard Component Replacement: 步骤 10 中的图像 1,1
    • Desolder each pin using the iFixit Soldering Guide (如何焊接和拆焊). Gently remove functional component for replacement.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Nicole C

于2011年10月12日注册

102 信誉积分

撰写一个指南

团队

Cal Poly, Team 17-7, Regan Fall 2011 Cal Poly, Team 17-7, Regan Fall 2011 的会员

CPSU-REGAN-F11S17G7

4 名成员

创作了4篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 21

总计 3,642