修复你的物品 社区 商店

Lasko CD08200 Disassembly

简介

Please refer to the Lasko CD08200 Troubleshooting guide before beginning to make sure this prerequisite guide applies to you.

Please disconnect the device and let it sit for 10 minutes so any fuses can drain before beginning this guide.

你所需要的

  1. Lasko CD08200 Disassembly, Lasko CD08200 Disassembly: 步骤 1 中的图像 1，2 Lasko CD08200 Disassembly, Lasko CD08200 Disassembly: 步骤 1 中的图像 2，2

    • Turn over the device and place it on its head.

    • Remove the four 14mm screws holding the bottom using a TR15 screwdriver.

    编辑

  2. Lasko CD08200 Disassembly: 步骤 2 中的图像 1，1

    • Remove both 14mm screws from the power cord casing using a Phillips #2 screwdriver.

    • Remove the power cord casing from the device case.

    编辑

  4. Lasko CD08200 Disassembly: 步骤 3 中的图像 1，3 Lasko CD08200 Disassembly: 步骤 3 中的图像 2，3 Lasko CD08200 Disassembly: 步骤 3 中的图像 3，3

    • Cut the sticker on the right side of the device using a Jimmy.

    • Unscrew the four 14mm screws with a Phillips #2 bit on the back of the device.

    • If your screwdriver cannot reach the screw, you can use the metal spudger.

    • Remove the back casing from the device.

    编辑

  5. Lasko CD08200 Disassembly: 步骤 4 中的图像 1，3 Lasko CD08200 Disassembly: 步骤 4 中的图像 2，3 Lasko CD08200 Disassembly: 步骤 4 中的图像 3，3

    • Remove the four 14mm screws housing the fan using the Phillips #2 screwdriver.

    • Remove the top of the fan housing with the fan attached and place it on the table.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与3其他贡献者

Artur Komissarov

于01/14/20注册

382 声望

创作了2篇指南

徽章: 8

+ 5更多徽章

团队

York University, Team S1-G1, Woodhouse Winter 2020 York University, Team S1-G1, Woodhouse Winter 2020 的会员

YORK-WOODHOUSE-W20S1G1

3 名成员

创作了9篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 2

过去 7 天： 6

过去 30 天： 22

总计 275