修复你的物品 社区 商店

Kyocera Hydro Life Charging Port Replacement

简介

This is a replacement guide for the charging port of the Kyocera Hydro Life. This guide requires specialized soldering knowledge and tools. Please ensure that you have these tools before attempting this guide.

你所需要的

  1. Kyocera Hydro Life Charging Port Replacement, Charging Port: 步骤 1 中的图像 1，2 Kyocera Hydro Life Charging Port Replacement, Charging Port: 步骤 1 中的图像 2，2

    • Remove the back of the phone.

    编辑

  2. Kyocera Hydro Life Charging Port Replacement: 步骤 2 中的图像 1，3 Kyocera Hydro Life Charging Port Replacement: 步骤 2 中的图像 2，3 Kyocera Hydro Life Charging Port Replacement: 步骤 2 中的图像 3，3

    • Remove the battery by pulling up on the end and towards yourself.

    编辑

  3. Kyocera Hydro Life Charging Port Replacement: 步骤 3 中的图像 1，1

    • Use a PH0 screwdriver to remove the 6 screws which are holding the panel in the phone.

    编辑

  4. Kyocera Hydro Life Charging Port Replacement: 步骤 4 中的图像 1，3 Kyocera Hydro Life Charging Port Replacement: 步骤 4 中的图像 2，3 Kyocera Hydro Life Charging Port Replacement: 步骤 4 中的图像 3，3

    • Remove the frame from around the back of the phone.

    • Then remove the back panel of the phone.

    • Remove the white sticker from in the middle of the phone.

    编辑

  6. Kyocera Hydro Life Charging Port Replacement: 步骤 5 中的图像 1，3 Kyocera Hydro Life Charging Port Replacement: 步骤 5 中的图像 2，3 Kyocera Hydro Life Charging Port Replacement: 步骤 5 中的图像 3，3

    • Desolder the 7 pins.

    • If you have never soldered before, follow this guide.

    • This type of soldering requires very specialized and expensive equipment. Please be careful if you decide to continue following this guide.

    编辑

  7. Kyocera Hydro Life Charging Port Replacement: 步骤 6 中的图像 1，2 Kyocera Hydro Life Charging Port Replacement: 步骤 6 中的图像 2，2

    • Desolder the positive and negative terminals.

    编辑

  8. Kyocera Hydro Life Charging Port Replacement: 步骤 7 中的图像 1，1

    • Peel back the copper plated sticker.

    • If the copper plated sticker is broken, it must be replaced. If it is not broken during disassembly, it can be reused.

    编辑

  9. Kyocera Hydro Life Charging Port Replacement: 步骤 8 中的图像 1，1

    • Remove the motherboard without breaking it by placing it to the side. It will still be attached to the phone.

    编辑

  10. Kyocera Hydro Life Charging Port Replacement: 步骤 9 中的图像 1，1

    • Using force, remove the charging port from the charging slot.

    编辑

  11. Kyocera Hydro Life Charging Port Replacement: 步骤 10 中的图像 1，1

    • Replace the charging port and ribbon.

    • If the copper-plated sticker is damaged, it will need to be replaced as well.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 5

总计 984