简介

Use this guide to replace a faulty water pump on your Kenmore 110 Series Washing Machine.

工具

配件

无需配件。

Unplug the washing machine!
  • Unplug the washing machine!

  • Carefully lay washing machine on its back.

添加评论

Mac RAM 套件
加速你的Mac。充分利用它的内存。
Mac RAM 套件
从Mac中清理出更多内存。
Carefully remove both wire harnesses connected to the pump. Squeeze and pull back hose clamp. Twist drain hose off of pump.
  • Carefully remove both wire harnesses connected to the pump.

  • Squeeze and pull back hose clamp.

  • Twist drain hose off of pump.

  • Using a 1/4" socket wrench, remove the three mounting screws.

  • Pull the pump out of place.

  • Pulling the pump away takes a little force.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

7等其他人完成本指南。

Robert Trout

于2012年09月26日注册

742 信誉积分

创作了5篇指南

团队

Cal Poly, Team 15-43, Forte Fall 2012 Cal Poly, Team 15-43, Forte Fall 2012 的会员

CPSU-FORTE-F12S15G43

5 名成员

创作了5篇指南

please provide info on how to test the water pump once it's removed...

Oscar Ramos - 回复

The instructions say nothing of the pulley belt and wheel.

I'm looking to work on a 110. 81080100

and

I have read that transmission fluid leaks out when the washer is on its side.

Is there a way to temporarily plug it?

thomas - 回复

添加评论

浏览统计数据:

过去的24小时: 22

过去的7天: 106

过去的30天: 528

总计 33,053