Jabra Speak 510 Speaker Replacement

简介

If the speaker is distorted or not functioning, you may need to replace it. This guide will give you step-by-step instructions on how to replace the speaker in the Jabra Speak 510.

你所需要的

步骤 1 Outer Casing

Jabra Speak 510 Speaker Replacement, Outer Casing: 步骤 1 中的图像 1，2

Jabra Speak 510 Speaker Replacement, Outer Casing: 步骤 1 中的图像 2，2

Using a metal spudger, peel back the foam pad on the bottom of the device to reveal six screws.

翻译

步骤 2

Remove the six 20 mm T6 screws from the bottom of the device.

翻译

步骤 3

Remove the back plate and the grey foam underneath.

翻译

步骤 4

Jabra Speak 510 Speaker Replacement: 步骤 4 中的图像 3，3

Use a small, pointed metal spudger to release the plastic tabs connecting the faceplate to the bottom of the speaker.
A small cable connects the faceplate to the device. Carefully disconnect the cable before fully opening the device.
Slowly flip the device open like a clam shell.
There are several wires soldered to the motherboard that prevent the faceplate from detaching completely.