修复你的物品 社区 商店

Jabra Freeway Microphone Replacement

简介

In this guide you will be replacing the microphone of the Jabra Freeway.

你所需要的

  1. Jabra Freeway Microphone Replacement, Front Panel: 步骤 1 中的图像 1，3 Jabra Freeway Microphone Replacement, Front Panel: 步骤 1 中的图像 2，3 Jabra Freeway Microphone Replacement, Front Panel: 步骤 1 中的图像 3，3

    • Turn off the device before proceeding. Failure to do so may result in device damage or injury to oneself.

    • Remove the rubber pads from the bottom of the device using the spudger.

    编辑

  2. Jabra Freeway Microphone Replacement: 步骤 2 中的图像 1，3 Jabra Freeway Microphone Replacement: 步骤 2 中的图像 2，3 Jabra Freeway Microphone Replacement: 步骤 2 中的图像 3，3

    • Remove the eight 6mm T9 screws.

    • Two of these screws are underneath the foam padding. This padding is glued on and will be destroyed in this process. Poking through the foam minimizes the damage to the device.

    编辑

  4. Jabra Freeway Microphone Replacement: 步骤 3 中的图像 1，3 Jabra Freeway Microphone Replacement: 步骤 3 中的图像 2，3 Jabra Freeway Microphone Replacement: 步骤 3 中的图像 3，3

    • Gently lift the front panel off of the device and carefully rest it to the side.

    编辑

  5. Jabra Freeway Microphone Replacement, Microphone: 步骤 4 中的图像 1，3 Jabra Freeway Microphone Replacement, Microphone: 步骤 4 中的图像 2，3 Jabra Freeway Microphone Replacement, Microphone: 步骤 4 中的图像 3，3

    • Remove the microphone from the microphone holding slot.

    编辑

  6. Jabra Freeway Microphone Replacement: 步骤 5 中的图像 1，1

    • Desolder the two wires connecting to the microphone.

    • Please refer to the soldering technique guide for instructions on desoldering and soldering.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与1其他贡献者

Alec Wilson

于10/19/16注册

741 声望

创作了5篇指南

徽章: 11

+ 8更多徽章

团队

UMass Dartmouth, Team 4-8, Catania Fall 2016 UMass Dartmouth, Team 4-8, Catania Fall 2016 的会员

UMASSD-CATANIA-F16S4G8

2 名成员

创作了6篇指南

2条评论

Perfect, thank you.

Edmond Lleshi - 回复

Based on my limited experience with this device, the component being replaced here is the secondary, or noise-cancelling microphone - not to be confused with the primary microphone. The other video showing replacement of the motion detector seems to be actually replacing the primary microphone.

Steve MacLeod - 回复

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 2

总计 986