修复你的物品 社区 商店

Insignia NS-15MS0832B Battery Replacement

简介

In this guide you will see step by step how to replace the battery in your Insignia Wi-Fi Windows Tablet. You will need three tools a plastic spudger, tweezers, and a soldering iron to complete the replacement of the faulty battery.

你所需要的

  1. Insignia NS-15MS0832B Battery Replacement, Battery: 步骤 1 中的图像 1，1

    • Begin the replacement for the battery by opening up the device with a plastic opening tool along the edge.

    • Work the plastic opening tool along the edge until you have separated the screen from the back plate.

    编辑

  2. Insignia NS-15MS0832B Battery Replacement: 步骤 2 中的图像 1，1

    • Your tablet should look like this once separated.

    编辑

  3. Insignia NS-15MS0832B Battery Replacement: 步骤 3 中的图像 1，1

    • Start by placing tablet face down and carefully removing the mesh wire tap from the back of the battery.

    编辑

  5. Insignia NS-15MS0832B Battery Replacement: 步骤 4 中的图像 1，1

    • Remove the flat wire from its connector with the tweezers and fold to the side so that it's clear of the battery.

    编辑

  6. Insignia NS-15MS0832B Battery Replacement: 步骤 5 中的图像 1，1

    • Next locate where the battery has three wires attached to the mother board. Take out the soldering iron and begin heating it up.

    • Check out iFixit's How to Solder and Desolder Connections guide for soldering help.

    编辑

  7. Insignia NS-15MS0832B Battery Replacement: 步骤 6 中的图像 1，1

    • Once the soldering iron has heated up, begin by placing the tip of the iron where the wire directly meets the mother board. The soldering should heat up and allow you to gently pull the wire off. Repeat twice more to remove each of the three wires.

    编辑

  8. Insignia NS-15MS0832B Battery Replacement: 步骤 7 中的图像 1，1

    • Once all wires have been removed from mother board, take plastic opening tool and separate the battery from the back of the screen. Its connected with glue, so don't worry.

    编辑

  9. Insignia NS-15MS0832B Battery Replacement: 步骤 8 中的图像 1，1

    • Remove battery and replace faulty one with new battery.

    编辑
结论

To reassemble your Insignia W-Fi Windows 8" Tablet, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与2其他贡献者

Harrison Smith

于10/19/16注册

329 声望

创作了3篇指南

徽章: 12

+ 9更多徽章

团队

Texas Tech, Team 1-1, Bennett Fall 2016 Texas Tech, Team 1-1, Bennett Fall 2016 的会员

TTU-BENNETT-F16S1G1

4 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 1

过去 30 天： 8

总计 1,144