简介

Follow this guide to remove and replace, repair, or clean the access door.

  1. Before performing any repairs, perform a water test on the pump by raising and lowering the handle a full 40 strokes. A properly performing pump will yield greater than 10 liters. Remove the hex head bolt from the top of the access door on the pump head.
    • Before performing any repairs, perform a water test on the pump by raising and lowering the handle a full 40 strokes. A properly performing pump will yield greater than 10 liters.

    • Remove the hex head bolt from the top of the access door on the pump head.

    • On reassembly, this bolt should be hand-tight.

  2. 所有超过US$100或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  3. Pull the access door straight up off the pump head. Store the access door in a sanitary place to prevent contamination. Store the access door in a sanitary place to prevent contamination.
    • Pull the access door straight up off the pump head.

    • Store the access door in a sanitary place to prevent contamination.

  4. The access door has a tongue that fits into the base of the pump head. The access door makes a convenient tray to hold nuts and bolts during the disassembly.
    • The access door has a tongue that fits into the base of the pump head.

    • The access door makes a convenient tray to hold nuts and bolts during the disassembly.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Andrew Optimus Goldberg

于2009年10月17日注册

409,026 信誉积分

创作了412篇指南

团队

iFixit iFixit 的会员

Community

108 名成员

创作了8,295篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 108