注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的16指南。
正翻译步骤 1
步骤 1

-
Remove the hex head bolt from the top of the access door on the pump head.
注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的16指南。
Before performing any repairs, perform a water test on the pump by raising and lowering the handle a full 40 strokes. A properly performing pump will yield greater than 10 liters.
Remove the hex head bolt from the top of the access door on the pump head.
On reassembly, this bolt should be hand-tight.
下一行
上一行
在下面插入新的一行
在上面插入新的一行
缩进当前行
取消缩进当前行
删除当前行
导航到下一步。
导航到上一步。
打开帮助