Huawei P10 battery disconnect prereq - iFixit 维修指南

简介

Use this guide to disconnect the battery in your Huawei P10 smartphone.

你所需要的

步骤 1 Back Cover

Huawei P10 battery disconnect prereq, Back Cover: 步骤 1 中的图像 1，3

Huawei P10 battery disconnect prereq, Back Cover: 步骤 1 中的图像 2，3

Huawei P10 battery disconnect prereq, Back Cover: 步骤 1 中的图像 3，3

Switch off your phone.
Remove the two Pentalobe P2 screws at the bottom.
Remove the SIM card tray.

步骤 2

Huawei P10 battery disconnect prereq: 步骤 2 中的图像 1，3

Huawei P10 battery disconnect prereq: 步骤 2 中的图像 2，3

Huawei P10 battery disconnect prereq: 步骤 2 中的图像 3，3

Insert a plastic opening tool between the display and the case starting at the bottom area of your phone.
Carefully pry the display with its parts out of the case.
Getting the prying tool in will require some effort, be careful not to slide the tool too much or you might slightly damage the housing.
After you pried out the bottom end, use the opening tool to open the clamps on both sides.

步骤 3

Huawei P10 battery disconnect prereq: 步骤 3 中的图像 1，2

Huawei P10 battery disconnect prereq: 步骤 3 中的图像 2，2

Don't open the phone all the way, yet. The cable for the standby and volume buttons is still connected to the back cover.
Swing open the phone backwards.
Use a spudger to disconnect the power- and volume button flex cable.

步骤 4 Battery disconnect

Huawei P10 battery disconnect prereq, Battery disconnect: 步骤 4 中的图像 1，3

Huawei P10 battery disconnect prereq, Battery disconnect: 步骤 4 中的图像 2，3

Huawei P10 battery disconnect prereq, Battery disconnect: 步骤 4 中的图像 3，3

Remove the Phillips #00 screw.
Use tweezers to remove the metal plate.
Use a spudger to disconnect the battery flex cable.

结论

To reassemble your device, follow these instructions in reverse order. Reapply adhesive where it is necessary.

作者

与2其他贡献者

Dominik Schnabelrauch

于11/23/16注册

203,329 声望

创作了682篇指南

+ 37更多徽章

团队

iFixit iFixit 的会员

Staff

135 名成员

创作了16,817篇指南

0条评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 61