How to reboot the Flipper Zero - iFixit 维修指南

简介

Flipper Zero is a versatile hacking tool and multi-functional device that can be used for a wide variety of purposes. Like any electronic device, it may sometimes require a reboot to resolve issues or to restore its normal operation.

你所需要的

步骤 1 Normal reboot

Press the Back- and Left-buttons at the same time.
This is a hardware reboot that triggers the CPU to restart firmware. Even when the operating system does not respond, the hardware restart will still work.

步骤 2 Recovery mode (DFU)

In this mode, Flipper Zero activates the bootloader and is detected in the computer as a DFU device. When the firmware is updated, Flipper Zero enters the recovery mode on its own. To exit this mode, perform a reboot.
Press the Back- and Left-buttons at the same time.
Release the Back-button but don't release the Left-button until the blue LED lights up.

步骤 3 Full recovery mode

If the bootloader is damaged, rebooting to update mode will not work. There will be no image on Flipper Zero's screen and the status LED will not work. In this case, only the full recovery mode will help to restore the device.
Disconnect Flipper Zero from USB.
Press and hold the OK- and Back-buttons for 30 seconds.
Connect the device to your computer.

步骤 4 Reboot from the Main Menu

Go to Main Menu > Settings > Power > Reboot.
Select Flipper OS, and then press the OK-button.

步骤 5 Reboot from the console

Connect your Flipper Zero to your PC.
Open Putty or a similar application.
Connect to the Flipper Zero COM port at 115200 bauds.
Enter the reboot-command and press Enter.

结论

Have fun!

3等其他人完成本指南。

作者

与2其他贡献者

Sebastian

于08/19/18注册

20,613 声望

创作了60篇指南

+ 42更多徽章

团队

German Translators German Translators 的会员

Community

27 名成员

创作了742篇指南

0条评论

浏览统计数据:

过去 24 小时： 28

过去 7 天： 192

过去 30 天： 970

总计 14,543