简介
Use this guide to open your TicWatchPro for repairs.
你所需要的
-
-
Before starting repairs, take your watch off the charger and power it down.
-
Remove the four 3.9 mm-long Torx T3 screws.
-
-
-
Carefully lift the back cover by the watch crown edge and swing it open to an upward position.
-
-
-
-
Use the flat end of a spudger to pry up and disconnect the sensor flex cable.
-
结论
To reassemble your device, follow these instructions in reverse order.
Repair didn’t go as planned? Check out our Answers community for help.
2等其他人完成本指南。
